Kit AiM Solo/SoloDL for Suzuki GSX-R

Step 1: Ignition Block Location

Identify the location of the Suzuki GSX-R bike's ignition block. It can be positioned either to the left or to the right of the handle bar hinge.

Step 2: Bracket Attachment to Adapter

Attach the AiM Solo/SoloDL bracket to the adapter bracket specifically designed for the Suzuki GSX-R. Use the two countersunk screws provided in the kit for this step.

Step 3: Securing the Adapter Bracket

Take an 8x45 pan head Allen screw and thread it into the toothed washer. Subsequently, place the rubber loose piece beneath the Suzuki adapter bracket.

Step 4: Inserting the Assembly into the Hinge

Insert the assembled bracket unit into the handle bar hinge. Ensure that the distance piece abuts the hinge securely.

Step 5: Tightening the Central Screw

Tighten the central screw located on the hinge. This action ensures that the mounted component grips firmly.

Step 6: Connecting the Device to the Bracket

Hook the AiM Solo/SoloDL device onto its designated bracket.

Step 7: Final Securing of the Device

Secure the device by using the screws that were already inserted at the rear of the Solo/SoloDL bracket.