Product Overview
This document provides operating instructions, safety information, and technical specifications for the Anslut RGB/WW Standard LED Bulb (Item No. 014833). This bulb offers a range of colors and white light, controlled via an included remote control.
Safety Instructions
- The product must not be connected to a dimmer circuit.
- The product can only be dimmed with the remote control.
- For indoor use only.
- The product must only be used in a dry room.
- The product must only be used with the supplied remote control.
- The product is only intended for decorative lighting and is not suitable for room lighting.
- For light sources that are significantly heavier than the ones they replace, the greater weight can adversely affect the mechanical stability of some lamps and fittings, potentially leading to inferior contact and less secure attachment of the light source.
Symbols Explained
- ? Read the instructions.
- ? remote Only dimmable with the remote control.
- ?? Must only be used in a dry room.
- ✅ CE Approved in accordance with relevant directives/regulations.
- ♻️ Recycle end-of-life product in accordance with applicable regulations.
Technical Data
| Parameter | Value |
|---|---|
| Rated voltage | 230 V ~ 50 Hz |
| Power consumption | 9 W |
| Socket | E27 |
| Luminous flux | 806 Im |
| Energy efficiency class | F |
| Life span | 25000 h |
| Max number of cycles on/off | 12500 |
| Time for light source to reach 60% of brightness | <1 s |
| Start time | < 0.5 s |
| Colour temperature | 2700 K + RGB |
| Size | 114 mm x, Ø60 mm |
| Ambient temperature | -40 to 40 °C |
| Range remote control | 3 m |
| Dimmer function*, integrated | 5 stage |
| *Only with remote control | |
Description and Operation
Remote Control Functions
The remote control features the following buttons:
- Power Button [O/I]: Turns the light on/off.
- Dimmer Control [Brightness Control]: Use the left button to decrease brightness and the right button to increase brightness.
- Manual Colour Control Button [M]: Press to manually change colors. Cycles through 15 colors gradually in a pre-programmed sequence.
- Cold White Light Button [❄️ White Light]: Button for cold white light.
- Automatic Mode Button [A]: Press to activate automatic color changing with 15 colors that transition immediately or gradually in a repeating cycle.
- Color Selection/Adjustment: To gradually change the color towards the color of a specific button, press the button opposite in the same column. Press any button to display its corresponding color.
Light Bulb Features
- Default Startup: When the light source is turned on after being off, it defaults to automatic color changing mode.
- Color Options: Offers 42 manually cycled colors and 15 automatically cycled colors (immediate or gradual).
- White Light: Provides cold white light.
Maintenance
Battery Replacement
The remote control is powered by batteries. Refer to Figures 2-5 for detailed instructions on replacing the batteries. This typically involves opening the remote, inserting the correct battery (e.g., CR2032), and closing the remote.
Environmental Care
Dispose of this product responsibly. Discarded products must be recycled according to applicable regulations. Please recycle according to local regulations.
Manufacturer Information
JULA AB, BOX 363, SE-532 24 SKARA
For the latest version of operating instructions, visit www.jula.com.
