PCBLC0101X2 Cable Protector Cover Ramps

Features

• Hassle-Free Cable Cover Ramps
• Universal Cord / Wire Protector Tracks
• Safely Conceals Cables, Wires, Cords, Hoses, Tubes, Pipes, etc.
• Rugged & Durable Construction
• Single Channel Concealment Track Design
• Marine Grade Waterproof Rated Construction
• Interlocking Male/Female Connector System
• Connectors Allow for Additional / External Unit Assembly
• Safe for Pedestrian Walking & Lightweight Vehicle Traffic
• Used for Home, Office & Business Applications
• Indoor/Outdoor Use

What's in the Box

• (2) Cable Cover Ramps

Technical Specs

• Cable Cover Ramp Style: Single, One-Channel Grooves
• Maximum Support Weight: Up to 11,000 lbs. Load Capacity
• Construction Material: Engineered Thermoplastic Rubber
• Maximum Cable Diameter/Thickness Compatibility: 10mm Diameter
• Single Channel / Groove Size (W x H): 1.57" x 0.4" inches
• Total Cable Ramp Size (L x W x H): 39.96" x 5.12" x 1.18" inches (Each)

Register Product

Thank you for choosing PyleUSA. By registering your product, you ensure that you receive the full benefits of our exclusive warranty and personalized customer support. Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

Start Here:

[QR code for product registration at PyleUSA.com/pages/register]

Register online at: PyleUSA.com/pages/register

Safety Precautions

• Always ensure the ramps are placed on a flat, stable surface.
• Do not exceed the maximum load capacity of 11,000 lbs.
• Avoid placing ramps in areas with heavy vehicular traffic or where sharp objects may be present.
• Inspect the ramps regularly for any signs of wear or damage.
• Ensure the connectors are securely interlocked to prevent disconnection during use.

Installation Instructions

1. Position the Ramps: Place the ramps on a flat surface where cables need to be protected.
2. Insert the Cables: Lift the top cover and insert the cables, cords, or hoses into the single-channel groove.
3. Close the Cover: Securely close the top cover to ensure cables are concealed.
   Connect Additional Units (if needed): Align the male and female connectors and interlock them to extend the ramp coverage.
4. Check Stability: Ensure the ramps are securely placed and stable before use.

Usage Guidelines

• Ensure cables do not exceed the maximum diameter of 10mm.
• Regularly check for proper placement and stability of the ramps.
• Avoid dragging or dropping heavy objects directly onto the ramps.
• Use in areas with pedestrian traffic or light vehicles only.

Maintenance and Storage

• Cleaning: Wipe the ramps with a damp cloth to remove dirt and debris.
• Inspection: Regularly check for signs of wear or damage, and replace if necessary.
• Storage: Store in a cool, dry place away from direct sunlight when not in use.

California Prop 65 Warning

WARNING: This product may expose you to chemicals, which is known to the state of California to cause cancer, birth defects and other reproductive harm. Do not ingest.

For more info go to: www.P65warnings.ca.gov

Questions or Comments?

We are here to help!

Phone: 1.718.535.1800

Contact us at: PyleUSA.com/ContactUs