Build Your Own Speaker

Assembly Steps

1. Assemble the Front Panel

   This step involves preparing the front panel of the speaker, which includes mounting the speakers and other components. The visual shows the front panel with two speakers, gaskets, and screws being assembled.

2. Assemble the Top Panel

   The top panel assembly typically includes the control interface and possibly other electronic components. The diagram shows the top panel with various electronic parts and wires being connected.

3. Assemble the Back Panel

   The back panel houses the power input, switches, and potentially the main circuit board. The visual depicts the back panel with a power switch, battery compartment, and wiring connections.

4. Assemble the Bottom Panel

   This step focuses on attaching the bottom panel, ensuring stability. The diagram shows the bottom panel being aligned with the main body, using screws for attachment. It also indicates aligning front pads for stability.

5. Join the 6 Panels Together

   This stage involves connecting all the assembled panels to form the main structure of the speaker. The visual shows the various panels being brought together.

6. Wiring Connections Instructions

   Wiring Made Easy: Match the same color plug-and-socket wires: Red to Red, White to White, Black to Black. The diagram illustrates the internal wiring, emphasizing color-coded connections for ease of assembly.

7. Bluetooth Connection & LED Sensitivity Adjustment

   Insert Batteries: Use 4 new AA batteries (not included). Slide the switch to "ON" to activate the speaker.

   Bluetooth Connection: 1. Open your phone's Bluetooth settings. 2. Find "SWHarmonics DIY" and tap to connect.

   Play Music & Adjust Volume by phone.

   LED Adjustment: The knob adjusts LED sensitivity, not volume. At max volume, LEDs may stay fully lit. At low volume, only 1-2 LEDs may flash irregularly. Match the sensitivity to your volume for the best rhythm effect.

   Low Battery Alert: If Bluetooth disconnects, reconnects repeatedly, music stutters, or volume drops suddenly without adjustment, replace the batteries.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2BPZO-25SWH0002A

Model(s): 25SWH0001, 25SWH0003, 25SWH0004, 25SWH0005, 25SWH0006, 25SWH0007, 25SWH0008, 25SWH0009, 25SWH0010