OPPO CPH2211 Quick Start Guide
Greetings from OPPO Mobile. This guide will show you how to use the phone and its important functions. You may also visit OPPO's official website to get more information about the phone.
How to Reboot the Phone
Press and hold the Power Button and Volume Up Button at the same time until the OPPO boot animation is displayed to reboot the phone.
How to Transfer Old Mobile Content to a New Mobile
You can use OPPO Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc. from your old phone to the new one.
Step 1: Non-OPPO Android Phone
If your previous phone was a non-OPPO Android phone, search "OPPO Clone Phone" in the Google Play store and install the app. You can also scan the QR code below to install it. If your previous phone was an OPPO phone, you don't need to install this app. Then run Clone Phone on both phones and follow the on-screen instructions.
Step 2: iPhone
If your previous phone was an iPhone, run "Clone Phone" on your new phone, and follow the onscreen instructions to migrate your data from your iCloud account.
Phone Components
The phone features the following components:
- Touch Screen
- USB Jack (USB-C)
- Front Camera
- Volume Key
- Power Key & Screen Lock Key
- SIM card tray
- Proximity sensor and light sensor
- Earphone Jack
- Secondary MIC (Sub MIC)
- Screen Fingerprint Receiver
- Rear Camera
- Flash
- Main MIC
- Speaker
- NFC
Accessories and Software Information
You are provided with the following standard accessories:
- 1 Phone
- 1 Charger
- 1 Earphone
- 1 USB data cable
- 1 Safety Guide
- 1 Quick Guide
- 1 SIM Ejector Tool
- 1 Protective Case
The product software version is: ColorOS V11.1
For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at www.oppo.com/en/certication.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Specifications
Product Model: CPH2211
Main Screen Parameter: 16.34cm (6.43 Inch)
Dimensions: 160.1×73.4×7.8 mm
Battery: 4220mAh/16.33Wh (Min), 4310mAh/16.67Wh (Typ)
Camera: Rear: 48 Megapixels + 8 Megapixels + 2 Megapixels + 2 Megapixels; Front: 16 Megapixels
Operating Temperature: 0°C - 35°C
SAR Values
Note: The SAR values above are the highest values reported for this device.
| Region/Test | Value |
|---|---|
| CE SAR (Head) | 0.992W/kg |
| CE SAR (Body) | 1.299W/kg |
| FCC SAR (Head) | 1.198W/kg |
| FCC SAR (Body) | 0.567W/kg |
| FCC SAR (Hotspot) | 0.981W/kg |
Radio Waves Specifications
| Radio Type | Frequency | Max. Output Power |
|---|---|---|
| GSM | 850MHz | 32.5±1dBm |
| GSM | 900MHz | 32.8±1dBm |
| GSM | 1800MHz | 29.5±1dBm |
| GSM | 1900MHz | 29.5±1dBm |
| WCDMA | Bands 1/4 | 23.3±1dBm |
| WCDMA | Band 2 | 23±1dBm |
| WCDMA | Bands 5/6/8/19 | 23.5±1dBm |
| LTE FDD | Bands 1/66 | 23.5±1dBm |
| LTE FDD | Bands 3/4 | 23.2±1dBm |
| LTE FDD | Band 2 | 22.8±1dBm |
| LTE FDD | Bands 5/8/12/17/18/19/26 | 23.5±1dBm |
| LTE FDD | Bands 20/28 | 24.0±1dBm |
| LTE TDD | Band 7 | 23±1dBm |
| LTE TDD | Band 39 | 23.2±1dBm |
| LTE TDD | Bands 38/40/41 | 23.5±1dBm |
| 5G NR | n1/n3/n7/n66 | 23±1dBm |
| 5G NR | n5/n8/n20 | 23.5±1dBm |
| 5G NR | n28 | 23.8±1dBm |
| 5G NR | n38/n40/n41 | 23±1dBm |
| 5G NR | n77 | 23±1.2dBm |
| 5G NR | n78 | 23.5±1.2dBm |
| Bluetooth | 2.4-2.4835GHz | 9±2dBm(EIRP) |
| 2.4G Wi-Fi | 2.4-2.4835GHz | 15±2dBm(EIRP) |
| 5G Wi-Fi | 5.15-5.35GHz ; 5.47-5.725GHz | 14±2dBm(EIRP) |
| 5G Wi-Fi | 5.725-5.85GHz | 11±2dBm(EIRP) |
| NFC | 13.56MHz | 42dBμA/m @10m |
Note for Czech Republic: This radio device can be operated in the Czech Republic under general authorizations from the CTU. Maximum radiated power: 2 W.
