HyperX Cloud III Gaming Headset

Overview

The HyperX Cloud III gaming headset features:

• A - Mic mute button: Press to mute/unmute the microphone.
• B - Microphone port: Connect the detachable microphone here.
• C - Volume wheel: Scroll up or down to adjust the volume level.
• D - Detachable microphone: A flexible and detachable microphone.
• E - Microphone mute LED: Indicates when the microphone is muted (LED On) or active (LED Off).
• F - USB dongle: Connects the headset wirelessly to your device.
• G - USB-C to USB-A adapter: Allows connection to USB-A ports.

Usage

Setting up with PC

1. Right-click the speaker icon in the system tray.

2. Select "Open Sound settings".

3. Select "Sound control panel".

Playback Device: Set the default playback device to "HyperX Cloud III".

Recording Device: Set the default recording device to "HyperX Cloud III".

Mic Mute Button

Press the button to turn the microphone mute on/off.

• LED On: Mic muted
• LED Off: Mic active

Volume Wheel

Scroll up or down to adjust the volume level.

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

HyperX NGENUITY Software

Download the NGENUITY software from hyperx.com/ngenuity. NGENUITY software features include:

• DTS Headphone:X
• Adjustable EQ settings

Questions or Setup Issues?

Contact the HyperX support team or see the user manual at hyperx.com/support.

Regulatory Information

Rating: 5V/100mA (USB dongle)

Federal Communication Commission Interference Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Canada Notices: This Class B digital apparatus complies with Canadian ICES-003.

Avis Canadian: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada statement: This device complies with ISED's licence exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

KCC statement: B급 기기(가정용 방송통신기자재) 이 기기는 가정용(B급) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며, 모 든지역에서 사용할 수 있습니다.

Japan VCCI Statement: この装置は、クラスB機器です。この装置は、住宅環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。

Models: Headset/耳機/耳机: CL006, USB-C to USB-A Adapter/USB-C 對 USB-A 轉接器/USB-C对USB-A转接器: CL006A, USB dongle/USB 訊號轉換器/USB讯号转换器: CL006D