Argon THRML 30-AC Quick Assembly Guide

Step 1: Thermal Pad Placement

Place the thermal pads on the CPU and PMIC Chip of the RPi 5.

The diagram shows the correct placement of thermal pads on the Raspberry Pi 5 board. Blue thermal pads are applied to the PMIC and RAM components, and also to the RP1 chip. A grey thermal pad is positioned on the CPU. An important note indicates: "Make sure to remove the transparent backing on both sides of the thermal pads".

Step 2: Secure the Cooler

Push mounting pins to fix the Argon THRML 30 Active Cooler.

This illustration depicts the insertion of mounting pins into the Raspberry Pi board. These pins are used to firmly attach the Argon THRML 30 Active Cooler to the system.

For additional resources and support, please visit: https://argon40.com/blogs/argon-resources