Heavy Duty Pipe Clamp FRSM - Metric
The large pipe clamp with sound insulation insert for medium to heavy loads
Applications
- Fixing of medium to heavy pipes with threaded rods or hanger bolts.
- Suitable for dry interior areas (standard metric version).
- Suitable for indoor and outdoor applications and environments with high stress to components due to corrosion (FRSM A4 stainless steel version).
Advantages
- High tested loads guarantee safe functioning of the FRSM.
- Combination connecting nut with thread M10/M12, M12/M16, or M16 allows for optimized mounting choices.
- Can be installed with 2 threaded rods, for example, for fixing cast iron roof drainage pipes.
- Two screws allow for easy adjustment to suit the outer pipe diameter.
- Screw safety features ensure trouble-free installation.
Properties
Material: Steel DD11 (material no. 1.0332) acc. to DIN EN 10111 (Standard Metric); Stainless steel A4 (material no. 1.4401) (A4 Version).
Zinc Plating: Electro zinc-plated (Standard Metric); Hot-dip galvanised (hdg Version).
Connecting Nut: M10/M12 SW 17, M12/M16 SW 22, M16 SW 24 (Standard Metric); M12 SW19, M16 SW24 (A4 Version).
Locking Screw: Hexagon screw with nut.
Material Sound Insulation Insert: EPDM; chlorine-free; silicone-free.
Temperature Range: -50 °C to +110 °C.
Hardness: 45 ± 5° Shore A.
Fire Behaviour: DIN 4102: Class B2.
Visual Examples
Heavy pipe on cantilever: A pipe clamp secured to a pipe mounted on a projecting support.
Heavy drainage pipe under angle bracket: A pipe clamp attached to a pipe fixed beneath an angled bracket.
Installation Guidance
Installation FRSM
The clamp is shown being fitted around a pipe. The clamp is then attached to a threaded rod via its connecting nut and locking screws.
Installation of FRSM with two threaded rods
Illustrates the clamp being secured to two threaded rods, demonstrating a method for supporting heavier pipes or specific configurations.
Technical Data (Selected Models)
| Item | Item No. | Clamping Width Range (D) [mm] | Max. Recom. Static Load (Nrec) [kN] | Sales Unit [pcs] |
|---|---|---|---|---|
| FRSM 19-23 | 554243 | 19-23 | 2.50 | 50 |
| FRSM 24-29 | 554244 | 24-29 | 2.50 | 50 |
| FRSM 33-36 | 554245 | 33-36 | 2.50 | 50 |
| FRSM 40-45 | 554246 | 40-45 | 2.50 | 20 |
| FRSM 47-52 | 554247 | 47-52 | 2.50 | 20 |
| FRSM 53-58 | 554248 | 53-58 | 2.50 | 20 |
| FRSM 60-65 | 554249 | 60-65 | 2.50 | 20 |
| FRSM 73-78 | 554250 | 73-78 | 3.00 | 20 |
| FRSM 79-85 | 554251 | 79-85 | 3.00 | 20 |
| FRSM 88-93 | 554252 | 88-93 | 3.00 | 20 |
| FRSM 100-106 | 554253 | 100-106 | 3.00 | 20 |
| FRSM 108-116 | 554254 | 108-116 | 3.00 | 20 |
| FRSM 124-129 | 093709 | 124-129 | 3.00 | 20 |
| FRSM 131-137 | 093710 | 131-137 | 3.00 | 20 |
| FRSM 138-145 | 093711 | 138-145 | 3.00 | 20 |
| FRSM 156-162 | 093712 | 156-162 | 3.00 | 20 |
| FRSM 165-171 | 093713 | 165-171 | 3.00 | 20 |
| FRSM 177-183 | 558303 | 177-183 | 3.00 | 20 |
| FRSM 188-194 | 093714 | 188-194 | 3.00 | 10 |
| FRSM 196-203 | 093715 | 196-203 | 3.00 | 10 |
| FRSM 205-214 | 505453 | 205-214 | 5.00 | 10 |
| FRSM 219-225 | 505454 | 219-225 | 5.00 | 10 |
| FRSM 244-250 | 505455 | 244-250 | 5.00 | 10 |
| FRSM 267-273 | 505456 | 267-273 | 5.00 | 10 |
| FRSM 277-283 | 558304 | 277-283 | 5.00 | 10 |
| FRSM 297-304 | 505457 | 297-304 | 5.00 | 10 |
| FRSM 305-316 | 552858 | 305-316 | 5.00 | 10 |
| FRSM 320-328 | 505458 | 320-328 | 5.00 | 10 |
| FRSM 348-356 | 504594 | 348-356 | 8.00 | 1 |
| FRSM 364-372 | 504595 | 364-372 | 8.00 | 1 |
| FRSM 400-409 | 504596 | 400-409 | 8.00 | 1 |
| FRSM 454-462 | 504597 | 454-462 | 8.00 | 1 |
| FRSM 500-508 | 504598 | 500-508 | 8.00 | 1 |
Note: Technical data for 'hdg' (hot-dip galvanized) and 'A4' (stainless steel) versions are also available, offering similar specifications with variations in material and finish.
