Owner's Manual for anko models including: 42778660 Solar Powered 4 Star Stake Lights, 42778660, 42778660 4 Star Stake Lights, Solar Powered 4 Star Stake Lights, 4 Star Stake Lights, Solar Powered Star Stake Lights, Star Stake Lights, Star Lights, Stake Lights, Solar Powered Lights, Lights

42778660-说明书.ai

Keen

SOLAR POWERED 4 STAR STAKE LIGHTS Keycode: 42778660

Specification: SOLAR POWERED 4 STAR STAKE LIGHTS - Kmart New Zealand

210*140 SOLAR POWERED 4 STAR STAKE LIGHTS Keycode: 42778660 Instructions: † Assemble the solar panel as shown in the picture. A-Solar Panel B- Plastic Cylinder C-Plastic Spike † Attach part B on to the back of solar panel A, then attach C to B by pressing firmly. † Switch F means Flash, S means Steady.Choose either of them to turn the light on.

210*140 SOLAR POWERED 4 STAR STAKE LIGHTS

15 dic 2024 — Instructions: • Assemble the solar panel as shown in the picture. A-Solar Panel B- Plastic Cylinder C-Plastic Spike. • Attach part B on to the back of solar ...

PDF preview unavailable. Download the PDF instead.

42778660 Manual ?srsltid=AfmBOopTsqMqKwnVGohcA7XnFSXiNbxiL0xlh nM3mjT1J2eb-aXnSsf

Specification:
Multi Colour LED 50x50mm Amorphous Solar Panel 1x AAA Ni-Cd rechargeable battery 1.2V, 300mAh Static and Flashing function
IMPORTANT:
· Charge battery for at least 8 hours before first use. · The solar light panel MUST be placed in a well-lit location for
maximum sunlight. Anything that shades the panel will affect the brightness and lighting duration. · Put the switch on the "OFF" position when not in use or in storage. · Use a damp cloth to clean it when there is a buildup of dust and/or dirt on the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT attempt to replace any of the bulbs in the light set.
WARNING: FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.

SOLAR POWERED 4 STAR STAKE LIGHTS
Instructions: · Assemble the solar panel as shown in the picture.
A-Solar Panel B- Plastic Cylinder C-Plastic Spike · Attach part B on to the back of solar panel A, then attach C to B by pressing firmly. · Switch F means Flash, S means Steady. Choose either of them to turn the light on. You will
only need to do this once, as the solar panel will turn the lights on and off automatically. · Place entire unit in a sunny position where there is soft ground to enable the spike to be
pushed in easil
Keycode: 42778660


Acrobat Distiller 8.0.0 (Windows)