User Manual for DR UTP models including: STR150C HDMI Over IP Extender, STR150C, HDMI Over IP Extender, Over IP Extender, IP Extender, Extender
5. 6. 7. 2. HDMI loop output port, connected to the HDMI display device such as TV or Monitor with an HDMI cable. HDMI OUT. HDMI IN. IR OUT. DC 5V. CAT OUT.
HDMI over IP Extender with Loop Out (150m) VER 1.1 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surgeprotection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Caution The product requires the use of UTP connectors. Please connect in direct interconnection method and do not cross connect. White and Orange Orange White and Green Blue White and Blue Green White and Brown Brown Direct Interconnection Method Table of Contents 1. Introduction .......................................................................................... 1 2. Features ............................................................................................... 1 3. Package Contents ............................................................................ 1 4. Specifications...................................................................................... 2 5. Operation Controls and Functions .................................................. 3 5.1 Encoder Panel .............................................................................. 3 5.2 Decoder Panel ............................................................................. 4 5.3 IRPin Definition ............................................................................... 4 6. Application Example........................................................................ 5 1. Introduction HDMI over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network Switch, and extends distance up to 150m/492ft between encoder and decoder via a CAT6 cable. It offers configurable high quality, low-bandwidth EZCast compression video. The video resolution is up to 1920×1200@60Hz. It also supports HDMI loop output on encoder. HDMI over IP Extender includes two units: Encoder and Decoder. Encoder is responsible for obtaining HDMI signals for encoding, and transmitting via CAT6 cables. It supports HDMI loop output. Decoder is responsible for signal decoding and outputting HDMI signals to HD displays. The product supports one-way IR control signal transmission. It offers the most convenient solution for HDMI extension over a single CAT6 cable and is the perfect solution for any application. 2. Features HDMI 1.4 and HDCP 1.4 compliant Support 6.75Gbps video bandwidth Video resolution is up to 1920×1200@60Hz Extend transmission distance up to 150m/492ft between encoder and decoder via a single CAT6 cable Adopt the third-generation EZCast video transmission protocol Support 1G standard 2L Switch Support one-way IR control signal transmission (from DEC to ENC) Support PCM 2.0ch-32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Compact design for easy and flexible installation 3. Package Contents Qty Item Qty Item 1 HDMI over IP Extender (Encoder) 1 HDMI over IP Extender (Decoder) 1 IR Blaster cable (1.5 meters) IR Wideband Receiver cable or/and 1 (1.5 meters) 1 5V/1A Power Supply 1 5V/1A Power Supply 1 User Manual 1 User Manual 1 / 6 4. Specifications Technical HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 1.4 Video Bandwidth 6.75Gbps Video Network Bandwidth 1G Video Resolution Up to 1920×1200@60Hz Note: This product does not support interlaced signals, that is, i-standard signals. HDMI Audio Formats Input: PCM 2.0ch, 2.1ch, Output: PCM 2.0ch 5.1ch, 7.1ch Sample Frequency 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz IR Frequency Wideband 20Hz ~ 60KHz IR Level 5Vp-p Compression Technology EZCast Request for Switch Transmitting data through the Data Link Layer Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2 Color Depth Input: 8/10/12-bit; Output: 8-bit Transmission Distance ESD Protection 150m/492ft Human body model--±8kV (Air-gap discharge) & ±4kV (Contact discharge) Connection Encoder Input: 1 × HDMI IN [Type A, 19-pin female] Output: 1 × HDMI OUT [Type A, 19-pin female] 1 × CAT OUT [RJ45 connector] Control:1 × IR OUT [3.5mm Stereo Mini-jack] Decoder Input: 1 × CAT IN [RJ45 connector] Output: 1 × HDMI OUT [Type A, 19-pin female] Control:1 × IR IN [3.5mm Stereo Mini-jack] Mechanical Housing Metal Enclosure Silkscreen Color Black 2 / 6 Dimensions 88mm [W] × 61.2mm [D] × 16.5mm [H] Weight Encoder: 158g, Decoder: 155g Power Supply Input: AC100 - 240V 50/60Hz Output: DC 5V/1A (US/EU standard, CE/FCC/UL certified) Power Consumption Encoder: 1.5W, Decoder: 1.1W (Max) Operation Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) 5. Operation Controls and Functions 5.1 Encoder Panel HDMI IN HDMI OUT CAT OUT IR OUT DC 5V 1 2 3 45 6 7 No. Name Function Description 1 HDMI IN HDMI input port, connected to HDMI source device such as DVD or Set-top box with an HDMI cable. 2 HDMI OUT HDMI loop output port, connected to the HDMI display device such as TV or Monitor with an HDMI cable. The CAT OUT port is connected to the CAT IN port of 3 CAT OUT decoder or connected to Switch / router / hub with CAT6 cable for sending signal to decoder. 4 IR OUT Connect the IR blaster cable. The IR blaster signal is from the IR IN port of decoder. 5 LINK LED The blue LED will flash when encoder is connected to decoder or connected to Switch / router / hub. 6 Power LED The blue LED will be on when the encoder is powered on. 7 DC 5V Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet. 3 / 6 5.2 Decoder Panel HDMI OUT CAT IN IR IN DC 5V 1 2 34 5 6 No. Name 1 HDMI OUT Function Description HDMI output port, connected to the HDMI display device such as TV or Monitor with HDMI cable. 2 CAT IN The CAT IN port is connected to the CAT OUT port of encoder or connected to Switch / router / hub with CAT6 cable for receiving signal from encoder. 3 IR IN Connect the IR receiver cable. The IR signal is sent to IR OUT port of encoder. 4 LINK LED The blue LED will flash when decoder is connected to encoder or connected to Switch / router / hub. 5 Power LED The blue LED will be on when the decoder is powered on. 6 DC 5V Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet. 5.3 IR Pin Definition IR Receiver and Blaster pin's definition is as below: IR Blaster IR RECEIVER IR BLASTER IR Receiver IR Blaster Signal Power NC IR Signal Power Grounding 4 / 6 6. Application Example TV DVD or Blu-ray Player TV HDMI IN HDMI OUT HDMI OUT CAT OUT IR OUT DC 5V Encoder Decoder CAT IN IR IN DC 5V IR Blaster Power Supply Ethernet CAT6 Power Supply IR Receiver Figure 1: Encoder connects Decoder directly The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 5 / 6 DVD or Blu-ray Player TV HDMI Cable HDMI IN HDMI Cable HDMI OUT CAT OUT IR OUT DC 5V Encoder Ethernet CAT6 L2 Switch TV HDMI Cable TV HDMI OUT CAT IN IR IN Decoder HDMI Cable HDMI OUT CAT IN IR IN DC 5V DC 5V TV HDMI Cable Decoder Ethernet CAT6 HDMI OUT CAT IN IR IN DC 5V Decoder Figure 2: Encoder connects Decoders via Switch (one Encoder to multiple Decoders) 6 / 6PDFlib PDI 10.0.0p1-i (macOS (x64)) Serif Affinity Designer 2 2.5.3