5 CORE Active Home 8 2-MIC Portable Battery Speaker System
Recording
STEP 1: Power on the speaker.
STEP 2: Insert the USB or SD card.
STEP 3: Long press the "record" button ▶️ to Record, and start to sing with the microphone.
STEP 4: Long press the "record" button ▶️ again to end Recording.
STEP 5: Short press the "play/pause" button ▶️ to select the Recording file in USB and automatically play music.
TWS Connection
Step 1: Power on the speaker.
Step 2: Turn on Bluetooth Mode for two speakers.
Step 3: Long press the "pause/TWS" button ⏸️ for two speakers.
Step 4: Two speakers connected after showing "L--R" on the display.
Cautions
- 1: It is not allowed to connect the external amplifier with the inlet of the speaker for avoiding to damage your speaker system!
- 2: There's electricity in the speaker and is danger, please do not open the rear cover for avoiding electric shock and influencing warranty!
- 3: Avoid intensive sunlight, rain and water, do not keep it under hot and damp environment for a long period.
- 4: Do not put fluid such as vase on the speaker.
- 5: Please unplug power supply if it won't be used for a long period.
Followings shall be filled into by the user with the assistance of sales.
Followings shall be filled into by the sales.
Tel:
Fax:
P.C:
Invoice number:
Installation and test date:
Date of sale:
Control Panel
1. AUX INPUT
2. USB/TF CARD INPUT
3. MODE: USB/AUX/BT/FM/LED SWITCH (LONG PRESS)
4. PREVIOUS TRACK
5. PAUSE/PLAY/TWS
6. NEXT TRACK
7. RECORDING/MIC PRIORITY
8. MIC INPUT
9. POWER SWITCH
10. POWER SUPPLY: AC~100-240V 50/60Hz
11. DC 12V INPUT
12. VOLUME +-
13. BASS +-
14. TREBLE +-
15. ECHO +-
16. MIC VOLUME +-
17. CHARGE INDICATOR
Remote Control System
- 1. Power
- 2. Mute
- 3. BT: Bluetooth
- 4. USB disk input
- 5. AUX: Audio input
- 6. REC Play
- 7. Mode: USB/BT/FM/AUX/TF Selection
- 8. Previous
- 9. Volume+
- 10. Play/Pause
- 11. Fast forward
- 12. 0-9 Direct Track input keys
- 13. RPT: press one time to playback last song, press two times to playback all songs
- 14. EQ: Standard/POP/Classical/Jazz/Country/Rock
- 15. Rewind
- 16. Next
- 17. Volume-
- 18. Voice cut: Eliminate human voices
- 19. REC: Recording
- 20. PRI: Microphone Priority
- 21. SD: Micro SD Card input
- 22. FM Radio 88-108Mhz
Failure Solution
No sound in the Mic
- Install the new battery correctly.
- Adjust the volume properly.
- Change the Mic to the frequency that matches the speaker's receiving frequency.
No sound when playing CD/MP3
- Check if the RCA audio cable is correctly connected to the speaker.
- Check if the volume is set to the lowest.
- Check if the correct signal source is selected.
- Check if the audio source has a fault.
USB equipment doesn't read disc
- Check if the USB/SD card is connected to the speaker.
- Check if the USB/SD card has MP3 files.
- Check if the USB/SD card has a fault.
Noise from the speaker
- The speaker has low noise properties. Background noise from VCD players and computer sound cards can be higher than that of the speaker.
- To check, unplug the audio wire of the speaker. No noise should be heard at 0.5m away from the speaker.
Anti-magnetic properties of the speaker
- The speaker uses a strong magnetic system.
- It can cause magnetic field interruption or magnetization if placed close to a monitor.
- Keep the speaker at least 1 meter away from the monitor.
Bluetooth connection
Primary Connection of a Bluetooth Enabled Device
Power On
- Turn on the speaker by pressing the POWER button.
Enter Bluetooth Mode
- Press the MODE button repeatedly on the speaker, or press the MODE button on the remote control to enter Bluetooth mode. This will be indicated on the LED display.
Pairing
- Using the native controls on your Bluetooth device, select "5 Core" in your Bluetooth settings to pair.
Maintaining Connection
- After initial pairing, the unit will stay paired unless unpaired manually by the user, or until it is erased due to a reset of the device.
- If your device becomes unpaired or you find it is unable to connect, repeat the above steps.
Successful Connection
- When successfully paired and connected, a voice prompt will notify you that the speaker is connected.
Stream Audio from your Bluetooth Device
Pairing a Bluetooth Device
- Follow the instructions above for pairing a Bluetooth device.
Selecting a Track
- Use the native controls on the connected Bluetooth device or remote to select a track.
Play, Pause, Skip
- To play, pause, or skip the selected track, use the native controls on the connected Bluetooth device.
Audio Playback
- Audio played through the connected Bluetooth device will now be heard through the speaker.