PETLIBRO Air WiFi Feeder

About This Product

Manufacturer: Shenzhen Libro Technology Co., Ltd.

Address: 12/F, Tower B, GALAXY WORLD, Yabao Road, Longgang District, Shenzhen, China

JP Importer: 株式会社成洋 (Seiyo Co., Ltd.)

Made in China

FCC ID: 2A3DE-PLAF108

IC: 28987-PLAF108

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents

(Note: The following is a transcription of the table of contents for reference.)

• IN THE BOX
• PRODUCT OVERVIEW
• GETTING STARTED
• SPECIFICATIONS
• SAFETY INSTRUCTIONS
• WARRANTY
• NOTICE

In the Box

• Automatic Pet Feeder (X1)
• Stainless Steel Bowl (X1)
• Bowl Tray (X1)
• Quick Start Guide (X1)
• User Manual (X1)
• Power Adapter (X1)
• Power Cable (X1)

Product Overview

The PETLIBRO Air WiFi Feeder consists of the following components:

Diagram Description: An exploded view of the PETLIBRO Air WiFi Feeder showing its components.

1. Lid Release Button
2. Lid
3. Food Tank
4. Tank Base
5. Rotor
6. Indicator Light
7. Food Tank Lock
8. Food Outlet
9. Stainless Steel Bowl
10. Bowl Tray

Indicator and Button Status

Diagram Description: Bottom view of the PETLIBRO Air WiFi Feeder showing ports and controls.

Key components on the base:

1. Power Cable Slot
2. USB-C Power Port
3. Reset Button
4. Power Switch (ON/OFF toggle)
5. Non-slip Rubber Pad

Indicator Status

Buttons

Getting Started: Installation

1. Remove the food tank cover and take out the accessories.Diagram Description: Shows the food tank cover being lifted upwards from the feeder base.
2. Connect the power cable. (Use the feeder wirelessly after fully charging its battery.)Diagram Description: Shows the USB-C power cable connecting to the feeder's port and the power adapter plugging into a wall outlet.
3. Toggle the power switch to "ON" to turn on the feeder.Diagram Description: Shows the bottom of the feeder with the power switch being moved to the 'ON' position.

Add Pet Food

1. Press the lid release button and remove the lid.Diagram Description: A hand presses the lid release button, and the lid is lifted off.
2. Add dry pet food to the food tank.Diagram Description: Dry pet food is being poured into the open food tank.
3. Replace the lid and press the lid release button.Diagram Description: The lid is placed back on the feeder, and the lid release button is pressed to secure it.
4. Install the stainless steel bowl and bowl tray.Diagram Description: The stainless steel bowl and its tray are placed onto the feeder's base.

App Control

1. Scan the QR code or search in your device's app store to download and install the PETLIBRO app.Diagram Description: Two QR codes are displayed. One is labeled "Download on the App Store" with an Apple App Store logo. The other is labeled "GET IT ON Google Play" with a Google Play logo.
2. Follow the instructions to configure the network.Diagram Description: Three smartphone screen mockups illustrate the process of adding a device in the PETLIBRO app, showing steps like selecting 'ADD DEVICE' and searching for the feeder.

Power Off

Toggle the power switch to "OFF."

Diagram Description: Shows the power switch on the bottom of the feeder being toggled to the 'OFF' position, and the power cable being unplugged from the wall.

Disassemble for Cleaning

1. Pull the food tank locks outwards.Diagram Description: Hands pull outwards on the locking mechanisms on the sides of the food tank.
2. Lift the food tank cover.Diagram Description: The food tank cover is lifted upwards from the main unit.
3. Hold the tank base, turn the rotor clockwise, and lift the rotor.Diagram Description: A hand holds the tank base, rotates the rotor clockwise, and lifts it out of the feeder.
4. Clean and air-dry the rotor and food bowl.Diagram Description: The rotor and bowl are shown being cleaned under a faucet icon ?, then placed to air dry under a sun icon ☀️.

Notes and Specifications

Note: Scan the QR code above to watch the video for product installation and cleaning.

Diagram Description: A QR code is displayed.

Important Notes:

• Power off the device before cleaning.
• Clean the food bowl with tap water.
• Do not clean the feeder in a dishwasher. Only the stainless steel bowl is dishwasher safe.
• Use a soft damp cloth to clean the feeder base. Do not wash any part with electronic components.

Specifications

Safety Instructions

• Use the feeder in a dry place.
• Use the feeder on a level surface.
• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation.
• Keep them away from children and pets.
• Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.
• Do not immerse the base part in water at any time as it may damage electronic components.
• Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.
• Do not disassemble the feeder other than as instructed in this user manual.
• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
• Do not modify the feeder.
• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
• To avoid tripping, always position the power cable out of the way of foot traffic.
• Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Power off the feeder when it's not in use.

Warranty and Notice

Warranty

• 12-month warranty
• For guidance on product use, contact PETLIBRO customer service via email: support@petlibro.com.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Radio Frequency Exposure Statement

To maintain compliance with the FCC's RF Exposure Guidelines, this equipment should be installed and operated with a minimum distance of 20cm from your body.