Roll A Shade - Commercial Window Shade Solutions
Roll A Shade - Commercial Window Shade Solutions
Instruction Manual for ROLLA SHADE models including: RASCPCMLVER.1 Installation Contract Plus Cassette, RASCPCMLVER.1, Installation Contract Plus Cassette, Contract Plus Cassette, Plus Cassette
7" Dual Bottom Fascia Motorized - Roll A Shade
File Info : application/pdf, 6 Pages, 3.13MB
DocumentDocument12101 Madera Way, Riverside, CA 92503 · 951-245-5077 · Fax: 951-245-5075 7240 Woodbine Ave. Suite 215 Markham, ON. L3R 1A4 · 888-245-5077 · Candian Sales Office www.rollashade.com © Copyright 2025 Roll A Shade® Inc., All rights reserved. - Contractor #916075 RASCPCMLVER.1 Page 1 of 2 Window Blind Cord Can STRANGLE Your Child · Children can climb furniture to reach cords · Move cribs and other furniture away. · Keep all cords out of children's reach. · Attach tension device to wall or floor. · Fasteners provided with the tension device may not be appropriate for all mounting surfaces. · Use appropriate anchors for the mounting surface conditions. www.rollashade.com © Copyright 2025 Roll A Shade® Inc., All rights reserved. - Contractor #916075 RASCPCMLVER.1 Page 2 of 2 TENSION DEVICE INSTALL ATION INSTRUCTIONS Rollashade.com info@rollashade.com 951.245.5077 © Copyright Roll A Shade® Inc. All Rights Reserved. HARDWARE INCLUDED Tension Device + Chain Tension Device Bracket Short Screws Screws INSIDE OR OUTSIDE APPLICATION OUTSIDE INSIDE TOOLS REQUIRED 3/8" Hex Head Phillips Head 1/8" Drill Bit Drill INSIDE OUTSIDE RASTDV2VER.2 2 OF 4 | © Copyright Roll A Shade® Inc. All Rights Reserved. INSIDE MOUNT & TENSION DEVICE INSTALLATION Pull the Chainhold down until the chain is fully tensioned (plunger will be fully raised). Screw device into wall. A B KEEP TENSION C SECURE TENSION DEVICE NOTE: Please make sure shade operates smoothly. RASTDV2VER.2 3 OF 4 | © Copyright Roll A Shade® Inc. All Rights Reserved. OUTSIDE MOUNT & TENSION DEVICE INSTALLATION With provided screws, install bracket first with large screws (use Chainhold marked screw hole locations as reference). Pull the Chainhold down until the chain is fully tensioned (plunger will be fully raised). Install Chainhold into bracket with small screws. A B PULL CHAIN DOWN & MARK LOCATION C REMOVE TENSION DEVICE & DRILL D E PLACE TENSION DEVICE ON BRACKET F SECURE TENSION DEVICE NOTE: Please make sure shade operates smoothly. RASTDV2VER.2 4 OF 4 | © Copyright Roll A Shade® Inc. All Rights Reserved.