Installation Checklist

Prep + Layout

Here are the primary steps for installation of an IrriGreen Irrigation system. Scan QR Code above for detailed step-by-step digital installation guide.

Verify you water source is:

Scan for Detailed Steps [QR Code]

• Pressure is between 40-80 PSI
• Flow rate is 8+ GPM
• No debris or sediment present
• Layout Zone and Head Location
• Trench, Run Water Line, Run Cabling

Check with local guidelines or trench to a minimum 12" depth

Download Irrigreen App:

• “Irrigreen 2” in Apple App Store
• “Irrigreen Homeowner” in PlayStore

Installation

Connections, Cabling, and Backfill

Scan for Detailed Steps [QR Code]

• Connect heads and cables.
• i1 + i2 terminals and commons
• Connect in trenches before backfilling soil
• Check connections via app's Test & Detect
• Wire 3rd party components (if present)
• Assign heads to zones
• Backfill trenches

System Setup

Calibrating, Mapping, and Schedules

Scan for Detailed Steps [QR Code]

• Calibrate every head (required before mapping)
• Map every Zone's shape
• Program schedules
• Enable AutoWater