Assembly Instructions for Ahokua Model 712 Metal Frame Twin Platform Bed
Warranty
We stand behind our products & service with confidence! If parts are damaged or missing, please feel free to contact us for a FREE REPLACEMENT. We warranty this product to be free from defects in materials. This warranty covers one year from the date of original purchase.
Notes and Warnings
- The item is only intended to be used indoors. The product must be assembled and used in accordance with the provisions of the manual.
- It is recommended that assembly is undertaken by about 2 adults. Please read assembly instructions before assembly and strictly adhere to each step outlined. Estimated assembly time is 30 minutes.
- WARNING FOR YOUNG CHILDREN: This product contains small components; please ensure that they are kept away from small children while assembling.
Parts List
| Part Label | Description | Quantity |
|---|---|---|
| A | Vertical Post | 1 |
| B | Side Rail Section | 1 |
| C | Side Rail Section | 2 |
| D | Headboard/Footboard Frame Piece | 1 |
| E | Headboard/Footboard Frame Piece | 1 |
| F | Bed Frame Base Support | 1 |
| G | Bed Slat | 2 |
| H | Bed Slat | 2 |
| I | Center Support Beam | 3 |
| J | Center Support Beam | 5 |
| K | Center Support Bracket | 1 |
| L | Center Support Bracket | 2 |
| Z | Connector Bracket | 3 |
| a | Bolt (1/4" x 85mm) | 4 |
| b | Bolt (1/4" x 50mm) | 4 |
| c | Bolt (1/4" x 28mm) | 6 |
| d | Bolt (1/4" x 19mm) | 12 |
| e | Washer (1/4") | 4 |
| f | Washer (1/4") | 6 |
| g | Nut (1/4") | 1 |
| h | Nut (1/4") | 1 |
| i | Washer (1/4") | 4 |
IMPORTANT: Please check parts list before you start to assemble. If parts are damaged or missing, contact your seller for a FREE REPLACEMENT. Please provide your order number, a brief message about the issue, and your shipping address. Thank you!
Assembly Steps
Step 1: Attach Side Rails to Frame
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 1: Shows connecting side rail sections (B, C) to a vertical post (D) using two bolts (d) and one nut (g). Also shows connecting other side rail sections (A, E) to a vertical post (C) using two bolts (d) and one nut (g).
Step 2: Continue Side Rail Assembly
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 2: Shows connecting side rail sections (A, E) to a vertical post (C) using two bolts (d) and one nut (g). This appears to be a continuation or mirror image of Step 1.
Step 3: Install Bed Slats (Part G)
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 3: Shows attaching bed slats (G) to the frame using four bolts (a), four washers (i), and four washers (e). Also shows attaching bed slats (H) to the frame using two bolts (b), two connector brackets (Z), and two nuts (g).
Step 4: Install More Bed Slats (Part H)
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 4: Shows attaching bed slats (H) to the frame using two bolts (b), two connector brackets (Z), and two nuts (g). This appears to be a continuation or repeat of the second part of Step 3.
Step 5: Insert Center Support Beams (Part I)
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 5: Shows inserting three center support beams (I) into the frame.
Step 6: Secure Center Support Brackets
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 6: Shows securing center support brackets (K, L) to the frame using six nuts (g) and six washers (f). One wrench (h) is shown.
Step 7: Insert Final Center Support Beams (Part J)
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 7: Shows inserting five center support beams (J) into the frame.
Step 8: Final Frame Assembly
Note: Please do not tighten the bolts until all are fixed.
Description of Diagram 8: Shows attaching the base support (F) to the frame using six bolts (d) and six nuts (g). The diagram also shows a wrench (h).
IMPORTANT: Please completely tighten all the bolts and nuts.
After-sales support email: after-saleservice@outlook.com
