Instruction Manual for iskydance models including: V1 Single Color LED Controller, V1, Single Color LED Controller, Color LED Controller, LED Controller, Controller
Application notes 1. All the receivers in the same zone. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 Zone 3
Single Color LED Controller Model No.: V1 1 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim/Multiple protection Features RED 4096 levels 0-100% dimming smoothly without any flash. Match with RF 2.4G single zone or multiple zone dimming remote control. One RF controller accept up to 10 remote control. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Connect with external push switch to achieve on/off and 0-100% dimming function. Light on/off fade time 3s selectable. Over-heat / Over-load / Short circuit protection, recover automatically. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 5-36VDC 8.5A 5-36VDC 1CH,8A 40W/96W/192W/288W (5V/12V/24V/36V) Constant voltage Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Weight Net weight Gross weight 0.041kg 0.052kg Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM frequency RF 2.4GHz + Push Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic 2000Hz (default) Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Protection Reverse polarity Over-heat Over-load Short circuit User Manual Ver 1.1.4 Mechanical Structures and Installations LED indicator Push switch com Push switch in Installation rack Match key LED output LED output + Power input Power input + Installation rack 33mm Wiring Diagram V1 Single Color LED Controller 97mm 18mm Push Switch V1 LED Controller Single color LED strip + V1 LED Controller Single color LED strip + RF remote AC100-240V Power Supply 5-36VDC Constant Voltage Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Match: Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. .SDwelietcteh: off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Page 1 Application notes 1. All the receivers in the same zone. 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 30m 30m Zone 3 Zone 4 Push Dim Function RF remote The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs. Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. Synchronization: If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters. User Manual Ver 1.1.4 PWM duty(%) Dimming Curve 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 10 20 30 40 50 60 70 80 90 100 Brightness(%) V1 Single Color LED Controller Light on/off fade time Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s. Malfunctions Analysis & Troubleshooting Malfunctions No light Uneven intensity between front and rear,with voltage drop No response from the remote Causes 1. No power. 2. Wrong connection or insecure. 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability. 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. Troubleshooting 1. Check the power. 2. Check the connection. 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace higher power supply. 4. Add power repeater. 1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6