Skyjack Aerial Work Platforms

Serial Number Information

Refer to the following serial number ranges for your unit:

• S/N A100 000001 - A100999999
• S/N A101 000001 - A101999999
• S/N A102 000001 - A102999999
• S/N A103 000001 - A103999999

General Safety and Operation Overview

This section provides a visual overview of key operational aspects and safety considerations.

Key Symbols: [Warning Symbol] (Exclamation Mark in Triangle), [Information Symbol] (Open Book), [8 Hour Timer].

Operational Context: [Operator with Aerial Lift] demonstrating use. [Person Inspecting Base] of the lift.

Environmental Considerations: Be aware of [Adverse Weather Conditions] (wind, rain, lightning) and [Overhead Power Lines]. Ensure stable ground support, avoiding uneven surfaces like [Wooden Planks].

Component Connection and System Check

Ensure proper connection of components for safe operation: [Plug] + [Emergency Stop Button] + [Power Source] = [Green Checkmark Symbol].

The scissor lift mechanism is designed for vertical movement: [Up Arrow] for raising, [Down Arrow] for lowering.

Control panels are located at the base and on the platform: [Platform Control Panel], [Base Control Panel]. Circular arrows [Circular Arrows] may indicate directional control.

Operating the Aerial Lift

Platform Operation: An operator stands on the aerial lift platform [Operator on Aerial Lift Platform].

Control Panel: The control panel features a rotary switch and an emergency stop button [Control Panel with Rotary Switch and Emergency Stop Button].

Basic Operation Sequence:

1. Step 1: Rotate the main control switch [Rotate Switch].
2. Step 2: Insert the key into the control panel [Insert Key].
3. Step 3: Operate the joystick to control movement [Operate Joystick].
4. Step 4: Utilize platform movement controls for lateral adjustments [Platform Movement Controls] (left/right arrows).
5. Step 5: Use the lift control lever for vertical adjustments [Lift Control Lever] (up/down arrows).

Emergency Stop and Control Functions

The [Emergency Stop Button] is prominently located for immediate shutdown.

The scissor lift mechanism allows for precise vertical positioning [Scissor Lift Operation].

Familiarize yourself with all control panel functions [Control Panel Operation] before use.

Assembly and Adjustment Procedures

Follow these steps for assembly or adjustment, involving fasteners [Fastener Assembly Steps].

Steps:

1. Step 1: Fastener detail.
2. Step 2: Fastener detail.
3. Step 3: Operator on lift.
4. Step 4: Fastener detail.
5. Step 5: Fastener detail.

Important Safety Warnings

Prohibition: [Prohibition Symbol] - Do not operate near overhead obstructions or power lines.

Always observe safety guidelines indicated by [Warning Symbol] and refer to the manual using the [Information Symbol].

Monitor the [Fuel/Battery Level Indicator] to ensure sufficient power for operation.

Operational Context

The [Clock Symbol] may indicate time-sensitive operations or battery life.

An operator with a toolbox [Operator with Toolbox] suggests maintenance or setup procedures.