ASSEMBLY INSTRUCTION
Assembly Steps
- Initial Tightening: Use a hex key (Allen wrench) ⚙️, not a power drill ❌, to tighten each screw to about 50% before fully securing any of them. Fully tightening one screw too early may cause others to misalign.
- Final Tightening: Once all parts are aligned, gradually and evenly tighten all screws using the proper tools.
- Misalignment Fix: If some screws don't line up, loosen all screws to 50%, adjust the parts, and try again.
- Stability Issue: If the item feels unstable, loosen all screws, adjust it on a flat surface, then retighten them evenly.
Hardware Fittings
| Item No. | Part Description | Description | Qty. | Extra Spare Parts Qty. |
|---|---|---|---|---|
| A | ? Screw | screw M8*35 | 4 | 1 |
| B | ? Screw | screw M8*30 | 11 | 1 |
| C | ⚙️ Spring Washer | spring washer for M8 | 15 | 1 |
| D | ?️ Nut | nut for M8 | 15 | 1 |
| E | ⚪ Washer | washer for M8 | 15 | 1 |
| F | ? Screw cap | Screw cap | 15 | 1 |
| G | ? Foot pads | Adjustable foot pads | 4 | 1 |
| H | ? Allen key | allen key for M8 | 1 | 0 |
| I | ? Spanner | Spanner for M8 | 1 | 0 |
| J | ||||
| K | ||||
| L |
Assembly Steps Visual Guide
Step 1: Attaching Table Legs
Attach the table legs to the underside of the tabletop. The diagram shows using screw M8*35 (or M8*30 as per page 2) and highlights connection points labeled '1' and '2'. Ensure the legs are correctly oriented before proceeding.
Step 2: Connecting Main Frame
Connect the main frame structure to the tabletop. The diagram shows using screw M8*35 (or M8*30 as per page 2) and associated hardware. Align the frame carefully before tightening.
Step 3: Assembling Seat and Backrest
Assemble the seat and backrest components to the main frame. The diagram shows using screw M8*35 and associated hardware. Ensure all connections are secure.
