LED2017-21KEY LED Controller

LED 迷你幻彩控制器 (LED2017-21KEY)

The remote control for the LED Mini Dream-color controller (Model: LED2017-21KEY) features several buttons for operation, described below.

Remote Control Functions

• On/AUTO/Off: Power on, Auto play 366 modes, Power/Play pause, Shutdown. The 'AUTO' button also serves to enter the setup menu for RGB sequence adjustment.
• M+ / M-: Mode switching (366 kinds), Mode increment/decrement.
• S+ / S-: Speed adjustment (10 levels), Speed increment/decrement.
• Brightness Buttons: Brightness adjustment (32 levels).
• Colored Buttons: Ten circular buttons for selecting static colors.

Special Features

• Shutdown: Auto-save function when the device is turned off.
• Grayscale/Brightness: 265 levels of grayscale, with 32 levels of brightness adjustment.
• RGB Sequence Adjustment: To adjust the RGB sequence, press 'AUTO' in the shutdown state to enter the setup menu. The first three LEDs on the strip will display the current RGB sequence. Press the 'AUTO' button to adjust the RGB sequence until the first three LEDs show Red, Green, and Blue. Then press the 'OFF' button to save.
• One-to-One Matching (RF Version): Press and hold the 'S-' button for 5 seconds for one-to-one remote pairing. This feature is only available for the RF version.
• Cancel Matching (RF Version): Press and hold the 'S-' button for 5 seconds to cancel one-to-one matching, allowing all remotes to control the device. This feature is only available for the RF version.

LED Mini Dream-color Controller (LED2017-21KEY)

The remote control for the LED Mini Dream-color controller (Model: LED2017-21KEY) offers comprehensive control over LED lighting effects, as detailed below.

Remote Control Functions

• On/AUTO/Off: Power on, Auto play 366 modes, Power/Play pause, Shutdown. The 'AUTO' button also initiates the setup menu for RGB sequence adjustment.
• M+ / M-: Mode switching (366 kinds), Mode increment/decrement.
• S+ / S-: Speed adjustment (10 levels), Speed increment/decrement.
• Brightness Buttons: Brightness adjustment (32 levels).
• Colored Buttons: Ten circular buttons for selecting static colors.

Special Features

• Shutdown: The controller automatically saves the current settings upon shutdown.
• Monochrome Display: Pressing the colored buttons displays the corresponding static colors on the light strip.
• RGB Sequence Adjustment: To adjust the RGB sequence, press 'AUTO' while the controller is in the shutdown state. The first three LEDs on the strip will indicate the current sequence. Press the 'AUTO' button repeatedly to cycle through sequences until the first three LEDs display Red, Green, and Blue. Press the 'OFF' button to save the configuration.
• One-to-One Matching (RF Version): For RF version remotes, pressing and holding the 'S-' button for 5 seconds enables one-to-one remote pairing.
• Cancel Matching (RF Version): Pressing and holding the 'S-' button for 5 seconds cancels the one-to-one matching, allowing all remotes to control the device. This feature is available only for the RF version.

FCC Compliance Information

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note on Class B Digital Device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Requirement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.