MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: EPS-65-20230313, EPS-65 Series, EPS-65 Series 65W Single Output Switching Power Supply, 65W Single Output Switching Power Supply, Single Output Switching Power Supply, Switching Power Supply, Power Supply
File Info : application/pdf, 3 Pages, 151.74KB
DocumentDocument65W Single Output Switching Power Supply EPS-65 series GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Features : Universal AC input / Full range User's Manual Optional L-Bracket and cover High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection 4×2" compact size LED indicator for power on No load power consumption<0.3W Operating altitude up to 4000 meters 3 years warranty TPTC004 UL62368-1 Bauart gepruft Sicherheit egelma ge od o s be wac g www.tuv.com ID 2000000000 BS EN/EN62368-1 IEC62368-1 EPS-65-3.3 -C =Blank,-C ; Blank=PCB only, -C=Enclosed type SPECIFICATION MODEL EPS-65-3.3 EPS-65-5 EPS-65-7.5 EPS-65-12 EPS-65-15 EPS-65-24 EPS-65-36 OUTPUT DC VOLTAGE 3.3V RATED CURRENT 11A CURRENT RANGE 0 ~ 12A RATED POWER 36.3W PEAK LOAD(10sec.) Note.6 39.6W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION ±0.5% LOAD REGULATION ±2.0% 5V 11A 0 ~ 12A 55W 60W 80mVp-p 4.75 ~ 5.5V ±2.0% ±0.5% ±1.0% 7.5V 8A 0 ~ 8.8A 60W 66W 100mVp-p 7.13 ~ 8.25V ±2.0% ±0.5% ±1.0% 12V 5.42A 0 ~ 6A 65.04W 72W 120mVp-p 10.8 ~ 13.5V ±2.0% ±0.5% ±1.0% 15V 4.34A 0 ~ 4.8A 65.1W 72W 150mVp-p 13.5 ~ 16.5V ±2.0% ±0.5% ±1.0% 24V 2.71A 0 ~ 3A 65.04W 72W 240mVp-p 21.6 ~ 27V ±1.0% ±0.5% ±1.0% 36V 1.81A 0 ~ 2A 65.16W 72W 280mVp-p 32.4 ~ 39.6V ±1.0% ±0.5% ±1.0% SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE 1000ms, 50ms/230VAC 2000ms, 50ms/115VAC at full load 50ms/230VAC 12ms/115VAC at full load Note.5 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/N(+), AC/L(-)] 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 80% 82% 84% 86% 87% 88% 89% AC CURRENT (Typ.) 1.8A/115VAC 1 A/230VAC INRUSH CURRENT (Typ.) COLD START 60A/230VAC LEAKAGE CURRENT <2mA/240VAC OVER LOAD PROTECTION OVER VOLTAGE 115 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover 39.7 ~ 46.8V WORKING TEMP. -30 ~ +70 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/(0 ~ 50) OPERATING ALTITUDE Note.7 4000 meters VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, heavy industry level, EAC TP TC 020 3077.6K hrs min. Telcordia SR-332 (Bellcore) ; 563.0K hrs min. MIL-HDBK-217F (25) PCB:101.6*50.8*29mm (L*W*H) ; with optional CASE:103.4*62*37mm (L*W*H) PCB: 0.15Kg; 96pcs/ 15.4 Kg/1.39CUFT ; with optional CASE: 0.3Kg; 45pcs/ 14.5Kg/0.63CUFT EPS-65-48 48V 1.36A 0 ~ 1.5A 65.28W 72W 300mVp-p 43.2 ~ 52.8V ±1.0% ±0.5% ±1.0% 90% 53.3 ~ 64.8V NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:EPS-65-SPEC 2023-03-13 65W Single Output Switching Power Supply Mechanical Specification 3.175 FS1 3 2 1 CN1 M1 101.6 95.25 HS1 3.175 HS2 SVR1 1 2 3 4 CN2 LED M2 4-3.2 EPS-65 series Unit:mm Optional cover: No.998A -T 50.8 44.45 3 max. 29 18 14.5 37 1.HS1,HS2 cannot be shorted. 2.HS1 must have safety isolation distance with system case. AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1 AC/N 2 No Pin JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 3 AC/L DC Output Connector (CN2) : JST B4P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1,2 +V 3,4 -V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent : Grounding Required ;M1 and M2 are Safety ground and should all be grounded Block Diagram EMI FILTER I/P & RECTIFIER FG O.L.P. POWER SWITCHING CONTROL Mylar film Optional L-Bracket: No.998A -D 4.2 12.7 2-M3 95 L=3 78 103.4 55 2-M3 L=3 24.2 2-M3 L=4 2- 3.5 30.85 62 RECTIFIERS +V & FILTER -V DETECTION CIRCUIT O.V.P. File Name:EPS-65-SPEC 2023-03-13 65W Single Output Switching Power Supply EPS-65 series Output Derating Static Characteristics LOAD (%) LOAD (%) 100 12~48V For PCB only 80 60 3.3~7.5V for Enclosed type 40 3.3~7.5V for PCB only 12~48V for Enclosed type 20 -30 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz File Name:EPS-65-SPEC 2023-03-13