KOORUI Wireless Keyboard Combo BK0104 & BM0104

Setup

Follow these steps to set up your KOORUI wireless keyboard and mouse combo:

1. Fetch the wireless keyboard and mouse. Take out the USB receiver from the mouse battery compartment.
2. Insert one 1.5V AAA battery into the keyboard according to the positive and negative signs. Turn on the power switch of the keyboard.
3. Insert one 1.5V AA battery into the mouse according to the positive and negative signs. Turn on the power switch of the mouse.
4. Plug the USB receiver into the USB port of your computer.
5. The mouse and keyboard are ready to work after the driver is installed automatically on the computer.

Independent Multimedia Keys

The keyboard features independent multimedia keys for convenient control:

• Fn+F1 = Audio Activate
• Fn+F2 = Volume -
• Fn+F3 = Volume +
• Fn+F4 = Mute
• Fn+F5 = Previous Track
• Fn+F6 = Next Track
• Fn+F7 = Play/Pause
• Fn+F8 = Stop
• Fn+F9 = Start Page
• Fn+F10 = Email
• Fn+F11 = My Computer
• Fn+F12 = Favorites
• Calculator
• My Computer
• Search
• Refresh
• Dormancy

Features

• The mouse and keyboard share a common receiver, which is located in the battery compartment at the bottom of the mouse.
• Adjustable mouse DPI levels: 800-1200-1600 (default setting is 1200).
• Features automatic Sleep mode and Wake up mode. The combo enters sleep mode after 8 minutes of inactivity. Press any button to wake it up. For extended periods of non-use, turn off the power switch to conserve battery.
• Compatibilities: Windows XP/VISTA/7/8/10; Mac.

ATTENTION: Functions of combination keys are not available on the Mac system.

Considerations

• Use 1.5V AAA or AA batteries only. Avoid using excessive-voltage batteries to prevent damage to internal components. If the product will be unused for a long time, remove the batteries to prevent corrosion.
• The product utilizes 2.4 GHz wireless transmission with a 10-meter transmission distance. This distance may be reduced by significant obstructions or low battery levels.
• For the first use, the product may not work (e.g., connection errors) if it has been unused for a long time. Attempt to pair the devices again.

Solution to Connection Failures

Keyboard Pairing:

1. Remove the battery from the keyboard and the USB receiver from the computer.
2. Reinsert the battery into the keyboard and plug the receiver into the computer's USB port.
3. Turn on the keyboard's power switch. Ensure the keyboard is within 20cm of the receiver. Press and hold the 'Esc' and 'K' keys together to re-pair.

Mouse Pairing:

1. Remove the battery from the mouse and the USB receiver from the computer.
2. Reinsert the battery into the mouse and plug the receiver into the computer's USB port.
3. Turn on the mouse's power switch. Ensure the mouse is within 20cm of the receiver. Press and hold the Right button and Scroll button together to re-pair.

Note: If the above solutions do not resolve the issue, repeat the pairing procedures. If the problem persists, please contact KOORUI support at support@koorui.net.

Solution to Problems of Waking Computer from Sleep Mode by Keyboard

Verify that your device is allowed to wake the computer:

1. Open the Keyboard control panel:
   • Windows Vista, 7, and later: Click Start, type 'keyboard' in the Start Search box, and click Keyboard or Microsoft Keyboard.
   • Windows XP and earlier: Click Start, click Run, type 'Control keyboard', and click OK.
2. Click the 'Hardware' tab, then click 'Properties'.
3. Click the 'Change Settings' button (Administrator access may be required).
4. Click the 'Power Management' tab and ensure 'Allow this device to wake the computer' is enabled.
5. Click OK, then click OK again.

Solution to Problems of Waking Computer from Sleep Mode by Mouse

Please refer to the instructions provided for the keyboard. For more methods to troubleshoot problems waking your computer from sleep mode, please visit: Microsoft Support.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local government office for details on where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.