User Guide for Newman Medical models including: SFTW-100 Dicom Option, SFTW-100, Dicom Option, Option
SFTW-100 - DICOM OPTION | Newman Medical
File Info : application/pdf, 2 Pages, 205.78KB
DocumentDocumentThank you for your purchase of Newman Medical's DICOM option. The setup of this program may involve PACS administrators and IT help of a certain level. To make the process go more smoothly it is necessary to have information gathered for installation. Below is a screen shot of the basic setup and information needed, please contact your PACS administrator or IT professional to gather this information. DICOM Modality Worklist Host Port Modality Timeout AE Title Our AE Title Figure 1 - Basic DICOM setup window DICOM Storage Host Port Modality Timeout AE Title Our AE Title DICOM Contact name DICOM Contact phone DICOM Contact email 5350 Vivian Street | Unit C | Arvada | CO | 80002 | 800-267-5549 www.newman-medical.com NM0134B Below are instructions for entering DICOM information, running and testing the DICOM connection. Setup Instructions 1. Enter the above into the DICOM Setup menu (under EDIT menu). A registration key is necessary to enter setup. a. If you purchased DICOM as part of your purchase order, this is normally entered at the factory for your convenience. b. If a window appears requesting a registration key, please contact Newman Medical support. 2. After entering DICOM information, press ECHO in setup to make sure simpleABI system and PACS Server are communicating. 3. Exit DICOM setup. 4. Open any new report (under FILE menu) to get the DICOM menu commands active. A report must be open in order to access DICOM menu commands under FILE menu. 5. From the file menu select Query worklist. a. The first time simpleABI DICOM runs it prompts to find the QueryPlugin.exe. It is located at one of the following locations, depending on simpleABI version purchased. i. (600CL/500CL/450CL/400CL) C:\Program Files (x86)\Newman Medical\Simple ABI CL Reporting\NewmanDICOM\QuerryPlugin ii. (300/250) C:\Program Files (x86)\Newman Medical\Simple ABI Reporting\NewmanDICOM\QueryPlugin iii. (ABI-Q) C:\Program Files (x86)\Newman Medical\ABIQ\NewmanDICOM\QueryPlugin 6. simpleABI DICOM subsequently pulling up the worklist signal correct operation. 7. You can push DICOM image or Structured Report to the PACS server by selecting `Store...' under the file menu. 5350 Vivian Street | Unit C | Arvada | CO | 80002 | 800-267-5549 www.newman-medical.com NM0134B