Download Center | OBSBOTExplore More About OBSBOT Tiny SE
User Manual for OBSBOT models including: Tiny SE Powered PTZ 4K Webcam, Powered PTZ 4K Webcam, PTZ 4K Webcam, 4K Webcam
2. Placement on a Place Tiny SE directly on your desktop. 3. Placement on a Tripod OBSBOT Tiny SE is equipped with a standard UNC 1/4-20 nut connector on the base
5 февр. 2025 г. — ➁ Place Tiny SE on the monitor. ➂ Adjust the angle of the stand to make the base as parallel as possible to the horizontal plane. Setting Up ...
2025-02-05 — We recommend that users watch tutorial videos and read the user manual first to ... Recommended Apple computers: ➀ MacBook Pro (2018, 8th Gen Intel Core ...
File Info : application/pdf, 5 Pages, 1.23MB
DocumentDocumentv1.0 User Manual English Reading Guide Note Important consideration Recommendation We recommend that users watch tutorial videos and read the user manual first to understand the usage process. https://www.obsbot.com/download Tutorial Video Users can access and watch tutorial videos through the following link and QR code to learn how to use the product correctly. https://www.obsbot.com/explore/obsbot-tiny-se OBSBOT Tiny SE Overview About Tiny SE OBSBOT Tiny SE is an AI-powered PTZ webcam equipped with a two-axis gimbal. It supports a variety of intelligent shooting modes and is supplemented by a variety of gesture control function to meet users' needs from different scenarios. OBSBOT Tiny SE is connected to the computer via USB, plug and play. It also comes with OBSBOT Center software to expand more advanced functions. System Requirements Windows 10 (64-bit) or later macOS 11.0 or later Recommended for 1080p 60/100fps Recommended Apple computers: MacBook Pro (2018, 8th Gen Intel® CoreTM i5 Processors or later) MacBook Air (2018, 8th Gen Intel® CoreTM i5 Processors or later) iMac Retina (2019, 8th Gen Intel® CoreTM i5 Processors or later) Recommended PC configuration: CPU: 7th Gen Intel® CoreTM i5 Processors or later RAM: 8GB Parts Info 01. 1080P FHD lens 02. Camera Indicator 03. Microphone 04. USB-C Port 05. UNC 1/4-20 Interface Setting Up Tiny SE Placement Instructions 1. Placement on a Monitor Please operate as shown in the following figure: Open the built-in stand at the bottom of Tiny SE. Place Tiny SE on the monitor. Adjust the angle of the stand to make the base as parallel as possible to the horizontal plane. 2. Placement on a Desktop Place Tiny SE directly on your desktop. 3. Placement on a Tripod OBSBOT Tiny SE is equipped with a standard UNC 1/4-20 nut connector on the base for mounting the camera to a stand/tripod. Connect to the Computer OBSBOT Tiny SE is compatible with both Windows and Mac computers. To set up your OBSBOT Tiny SE, use the standard data cable to connect it to the USB port on your laptop or desktop computer. If necessary, use the provided USB-C to USB-A adapter. The webcam will automatically install on your device. Please wait a few seconds for the installation to finish before attempting to access the webcam. After the installation is complete, you can use popular video call platforms such as Zoom, Microsoft Teams, Skype, or Google Meet to start streaming with your Tiny SE. If the product is in working condition for a long time, the bottom of the product will heat up, which is normal situation. To avoid compatibility problems, be sure to use the standard data cable to connect the computer. To prevent the product from malfunctioning due to insufficient power supply, please connect it directly to your computer or use an expansion dock with an independent power supply. Gimbal OBSBOT Tiny SE is equipped with a 2-axis brushless motor gimbal. The controllable rotation range for the pan is ±140°, and for the tilt is 30° to -70°. Sleep Mode Manual Sleep Please adjust the lens to point straight down. If the indicator light is off, it means that the sleep mode is activated. Device Auto Sleep You can use OBSBOT Center software to set the sleep time so that it automatically enters sleep mode as needed. Gesture Control 2.0 Turn On/Off Human Tracking To enter human tracking mode, perform the gesture as shown in the figure. The current status light will flash twice in succession and then turn to a steady blue state, indicating that you have successfully entered human tracking mode. To exit human tracking mode, perform the same gesture again. The blue status light will flash twice continuously and then turn to a steady green state, indicating that you have successfully exited human tracking mode. Zoom to 2x (default) / Cancel Perform the gesture control as shown in the figure. The status light will flash twice continuously to indicate that the zoom in/out operation has been performed. Dynamic Zoom Perform gesture control as shown in the figure until the status light starts flashing, at which means the dynamic zoom function is activated. Zoom in or out as the distance between your hands changes, until no gesture is detected or the zoom status can no longer be adjusted. * Dynamic Zoom only supports use in Landscape shooting Please be careful not to cover your face with your hands and keep your fingers open for the gesture control. Please go to the link below to find the tutorial video for gesture control. https://www.obsbot.com/explore/obsbot-tiny-se Zoom OBSBOT Tiny SE supports 4x digital zoom. Gesture Control By default, the zoom setting is 2x. Users can create customized gesture zoom settings from 1x to 4x via OBSBOT Center software. Manual Control Users can do the manual control for zoom settings from 1x to 4x via OBSBOT Center software. Focus The OBSBOT Tiny SE supports two focusing methods. Auto-Focus Utilizing OBSBOT's advanced AI technology, the auto-focus feature intelligently adjusts the lens in real time, ensuring that you remain in focus at all times, regardless of your proximity to the camera. Manual Focus Users can disable the auto-focus feature and manually adjust focus when using OBSBOT Center software. HDR By default, HDR feature is disabled. However, users have the option to enable HDR on the OBSBOT Center software to enhance their appearance on video, even in low light or direct sunlight. Various Shooting Modes The OBSBOT Tiny SE offers three shooting modes, with landscape mode being the default. Landscape shooting This mode is suitable for conventional mounted cameras. Portrait shooting By horizontally placing the camera through an external accessory, it will automatically enter into the portrait mode. The automatic rotation feature can only be used in software that supports it, such as OBS, etc. Some other software may require manual rotation. Up-side-down shooting The camera can be installed upside down, and the screen will automatically rotate for use. Human Tracking Activate human tracking using gesture control or OBSBOT Center software. OBSBOT Tiny SE will automatically track and ensure that the figure is in the best composition position. Additionally, zone tracking can be enabled through the app for more creative gameplay. Group Mode When you activate the group mode, the view will automatically adjust as participants join or leave the image. This ensures that everyone is properly covered and visible. By using the group more, the view will always focus on the right amount of the view. Hand Tracking To enable hand tracking, simply use the OBSBOT Center software. OBSBOT Tiny SE will automatically detect and track your hand on the screen, and you can adjust the tracking area as needed. Indicator Description Equipment Status Power-on initialization No target is selected Execute gesture control Enable human tracking Target losing Enable hand tracking/group mode Firmware upgrading Firmware upgrade failed Device in fault, such as gimbal failure, AI errors, etc. Sleep mode Indicator status Blue light flashes slowly Green light keeps on The indicator for the current state blinks twice in succession, it will either switch to the post-recognition indicator state upon successful recognition or maintain the pre-recognition indicator state in case of recognition failure Blue light keeps on Yellow light keeps on Purple light keeps on Blue/yellow flash alternately Red light flashes slowly Red light keeps on Light off OBSBOT Center Software Overview OBSBOT Tiny SE provides advanced users of Windows and Mac with a control software for OBSBOT Center, which allows you to perform a series of extended operations on the camera, such as controlling the motion trajectory of the pan-tilt, selecting or canceling tracking targets, setting presets or expanding various creative gameplay. Download and Installation Download and install OBSBOT Center through https://www.obsbot.com/download to further enhance your user experience. Firmware Upgrade OBSBOT Tiny SE upgrades through OBSBOT Center software. When firmware is available for update, there will be corresponding prompts after connecting the device. Please follow the info on prompts. Do not disconnect the camera during firmware upgrade process.