Installation Guide for maXpeedingrods models including: SWB-LINC-0006-LC Adjustable Torque Tie Rods Rear Sway Bar End Links, SWB-LINC-0006-LC, Adjustable Torque Tie Rods Rear Sway Bar End Links, Torque Tie Rods Rear Sway Bar End Links, Rear Sway Bar End Links, Bar End Links
maXpeedingrods for Lincoln LS 00-06 4pc Adjustable Torque Tie Rods Rear Sway Bar End Links For Thunderbird 2002-2005 : Automotive
TIE RODS AND DROP LINKS INSTALLATION INSTRUCTIONS TIE RODS AND DROP LINKS FIT LINCOLN LS/FORD THUNDERBIRD PRODUCT INFORMATION These tie rods and sway bar end links will replace your stock rugged parts. The length-adjustable tie rods help to realign your vehicle. KIT CONTENTS 1 2 2x Rear Sway Bar End Links 2x Rear Inner Tie Rods INSTRUCTIONS 01. Jack the rear end of the vehicle and secure it with jack stands. Remove the rear wheels. 02. Disconnect the tie rod from the knuckle. Disconnect the inner tie rods. Repeat on the opposite side. 03. Install new inner tie rod. Repeat on the opposite side. 01 04. Disconnect the stock sway bar end links from the sway bar. 05. Install the new sway bar end link. Repeat on the opposite side. 06. Tighten all bolts and nuts down to spec. 07. Put wheels on and lower the vehicle to the ground. MAINTENANCE Highly suggest drivers inspect the nuts and bolts for tightness regularly. All modifications must be installed by qualified personnel and in compliance with your local modification regulations. 02 03 SWB-LINC-0006-LCAdobe PDF library 17.00 Adobe Illustrator(R) 24.0