YAOTE Item Locator Manual
Introduction
The YAOTE Item Locator is a device that works with the Apple Find My network. It provides an easy and secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch.
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
The "Works with Apple" badge signifies that a product has been designed to work specifically with the identified technology and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation or use of this device, or its compliance with safety and regulatory standards.
Getting Started
-
Check For Updates
To use the Apple Find My app to locate your Item Locator, the latest version of iOS, iPad OS, or macOS is recommended.
-
Power On
Press the button on the item locator. It should beep once, indicating it is powered on and in pairing status.
A diagram shows the item locator with a button labeled "Button".
-
Add Your Item Locator
-
Start the APP
Open the Find My app on your supported iPhone or iPad.
-
Connect your Item Locator
Step 1: Choose the "Items" tab and then tap on "Add Item". Alternatively, tap on the "+" icon directly.
A screenshot shows the Find My app interface with the "Items" tab selected and a "+" icon visible.
Step 2: Tap "Other Supported Items".
A screenshot shows the "Add New Item" pop-up with options to "Add AirTag" and "Other Supported Item".
Step 3: Make sure your Item Locator is close to your phone. Wait until you see "iTag", then tap "Connect". Follow the pop-up to fill in a name and select an emoji, then tap "Continue". You will be prompted to add your Item Locator to your Apple ID. Tap "Continue", then tap "Finish" to set up your Item Locator.
A screenshot shows the "iTag" connection screen with a "Connect" button.
-
Function Introduction
Locate your Item
- Find Item Locator: Tap "Play Sound" to make your Item Locator beep when it is nearby.
- Find your Item Locator's location: Your Item Locator's last known location will appear on the map using the emoji chosen during setup. Tap "Directions" to navigate to the last known location.
A screenshot shows the Find My app displaying an item's location with options to "Play Sound" and get "Directions".
Find Item When Out of Range
- Enable the "Notify When Left Behind" toggle to receive a notification when you leave your Item Locator behind and it is out of range of your device.
- Enable the "Notify When Found" toggle. When your Item Locator is seen by another Find My-enabled device, you will receive a notification of its updated location.
- Note: "Notify When Found" can only be activated when your Item Locator is out of range.
A screenshot shows the Find My app with "Notify When Found" enabled and "Notify When Left Behind" set to "Off". It also displays Manufacturer: Shenzhen Tingting Technology Co., Ltd. and Serial Number: FEBBFF24242434B5.
When Your Item is Lost
When your item is lost, under "Lost Mode", tap the "Enable" tab. A screen detailing Lost Mode will appear. Tap "Continue". You can enter your phone number or email address and tap "Next". You may also enter a message to be shared with the person who finds your item. Tap "Activate" to enable "Lost Mode".
- Note: When "Lost Mode" is enabled, "Notification When Found" is automatically enabled.
- Note: When "Lost Mode" is enabled, your Item Locator is locked and cannot be paired to a new device.
A screenshot shows the "Phone Number" screen in the Find My app, prompting for contact information for Lost Mode.
Remove your Item Locator
- Ensure "Lost Mode" is disabled. Tap the "Remove Item" tab. A summary will open; tap "Remove" to confirm.
Reset your Item Locator
After successfully removing the Item Locator from the app, press the Item Locator's function button four times rapidly, and then hold it a fifth time until you hear a ringing chime. The Item Locator is now reset and ready to pair to a new device.
A screenshot shows the item locator details in the Find My app, with options to "Rename Item" and "Remove Item". It also shows Model: iTag and Firmware: 1.7.9.
How to replace the Battery
- Carefully rotate the opening tool up or down by about 90 degrees, and open the case in the small gap on the side of the item finder.
- Replace the battery with a new CR2032 battery 3V (positive pole upward).
- Carefully close the Item Locator.
A diagram shows the process of opening the item locator and replacing the battery.
Unwanted Tracking Detection
If your iPhone detects that an unknown Item Locator is traveling with you, it will send you a notification. A sound will start playing so you can find it. These alerts are only activated when an Item Locator is not connected to its owner's phone. Your partner's Item Locator will not trigger a sound if they are with you.
Button Function
- Power on (Find My function is on): Press the button once to turn it on. It should beep with a ringing chime, indicating it is powered on. If the product is not paired, it will shut down within 3 minutes. You need to trigger the Find My function again to continue pairing.
- Power off (Find My function is off): Hold the button for 3 seconds. Release your hand on time; you will hear two beeps indicating it is powered off.
- Enable learn more information query: Press the button twice rapidly and you will hear a confirmation sound. This operation will be displayed on the Find My app to guide the person who finds the device to obtain the device information, such as the owner's contact information (if the item is set to Lost Mode on the app) and the serial number of the device.
- Factory reset: Press the button 4 times rapidly and then hold it a fifth time until you hear a ringing chime. A reset operation is required to enable the device to enter the pairing state again (synchronization of Find My also requires simultaneous unbinding) and rebind the new Apple ID account.
Important tips
- When pairing a device with the Find My app, the phone links to the Apple server. Pairing may fail due to network problems. Recommended actions: 1. Change the phone's network, such as switching between WiFi and mobile. The first pairing may take a long time; please wait patiently. 2. Reset your item. 3. Repair with the Find My app.
- When "Lost Mode" is enabled, DO NOT REMOVE ITEM in the app. Your Item Locator will be locked and cannot be paired to a new device.
- Battery usage time varies depending on personal usage habits. Frequent use of the call function can accelerate battery consumption.
Regulatory Safety Information
Warning: The battery must be kept out of the reach of children. Due to chemical burns and potential esophageal perforation, swallowing may cause serious injury or death. If a child accidentally swallows the button battery, please call for rescue immediately and seek medical advice in time.
Logos shown: FC, CE, crossed-out trash bin, RoHS COMPLIANT, UK CA.
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
A warning symbol with a battery and exclamation mark is shown.
Keep in original package until ready to use. Immediately dispose of used batteries and keep away from children. Do NOT dispose of batteries in household trash.
WARNING
- KEEP new and used batteries OUT OF REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- A) Battery type: (CR2032); and
- B) Nominal voltage: DC 3V.
A warning symbol indicating "KEEP OUT OF REACH OF CHILDREN" is shown, along with text stating that swallowing can lead to chemical burns, perforation of soft tissue, and death, with severe burns occurring within 2 hours of ingestion. Seek medical attention immediately.