Introduction
This manual provides essential information for the safe and effective setup and operation of the Tektronix 2 Series Mixed Signal Oscilloscope (MSO24, MSO22). It is designed for qualified users and covers crucial safety guidelines, initial instrument configuration, and fundamental operating procedures.
Discover how to connect probes, navigate the user interface, perform basic measurements, and ensure safe operation. For detailed information on advanced features and maintenance, please refer to the full product documentation available on the Tektronix website.
For product support and registration, visit tek.com/register.
Safety First
Tektronix prioritizes user safety. This manual contains critical warnings and precautions to prevent electrical shock, fire hazards, and equipment damage. Always adhere to the safety instructions provided, especially when working with exposed circuitry or high voltages.
Key safety points include:
- Only qualified personnel should perform maintenance.
- Ensure proper grounding of the instrument.
- Use only approved power cords and accessories.
- Disconnect power before performing any internal checks or maintenance.
- Refer to the manual for specific safety symbols and their meanings.
For comprehensive safety details, consult the 'Safety Information' section of the full manual.
Getting Started
This section guides you through the initial steps of setting up your 2 Series MSO:
- Confirming Package Contents: Verify all accessories are included.
- Connecting Probes: Learn the correct procedure for attaching probes to the instrument and the circuit under test.
- Instrument Setup: Configure essential settings such as time zone, clock format, and perform signal path compensation (SPC) and probe compensation.
- Basic Operation: Understand how to add waveforms, configure channels, use the AutoSet function, set up triggers, and adjust horizontal parameters.
- Making Measurements: Learn to add, configure, and remove measurements, as well as utilize cursors for analysis.
For detailed instructions on connecting to a network or PC via USB, refer to the relevant sections within the manual.
Environmental Considerations
Tektronix is committed to environmental responsibility. This product is designed for professional use and is not intended for domestic use or by children. Information regarding the proper disposal and recycling of the product and its components, including batteries, is provided to minimize environmental impact.
Please visit www.tek.com/product-recycling for detailed recycling information.
