Warranty
User Manual for OttLite models including: CSN8500C Extended Reach LED Desk Lamp, CSN8500C, Extended Reach LED Desk Lamp, Reach LED Desk Lamp, LED Desk Lamp, Desk Lamp, Lamp
OttLite Extended Reach LED Desk Lamp - LED Bulb - Flexible Neck, ClearSun LED, Touch-activated, Adjustable Brightness, Glare-free Light - Desk Mountab | OttLite Technology | Dominion Office Products
File Info : application/pdf, 1 Pages, 126.09KB
DocumentDocumentG D F H C B A Extended Reach LED Desk Lamp CSN8500C CSN85G5C CSN8500C-SHPR CSN85G5C-SHPR INS220707 ENGLISH Extended Reach LED Desk Lamp CONGRATULATIONS! You've purchased the finest in natural lighting technology with your new OttLite® product. FCC PART 15 PRODUCT REGISTRATION FORM Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty WARNING: To prevent electric shock, make sure the lamp is not plugged in until all steps are complete. NOTE: THIS UNIT IS FULLY ASSEMBLED 1. Remove lamp from packing, placing lamp body base (A) flat on a steady surface. 2. Connect power adapter input (B) into connector (C) in the rear-bottom of the lamp. 3. Plug the power adapter (D) into a standard household 120V AC outlet. Note: Only use with the supplied power adapter to avoid damage or fire. 4. Turn the lamp ON/OFF by using power switch (E) located at front of shade (F). 5. To power LED settings, slightly touch switch (E) to achieve the following: · Turn lamp "ON" to 1st brightness setting; touch the switch "once"; · for 2nd brightness setting; touch the switch "two-times"; · for 3rd brightness setting; touch the switch "three-times"; · to turn lamp "OFF"; touch the switch "four-times". 6. To reposition the light, hold the lamp base (A) steady and grasp either flex-neck (G) or shade (F) depending on needed adjustment. DO NOT FORCE the shade or lamp body outside allowable adjustable range as excessive adjustment may cause damage. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (B)/NMB-005 (B) E SAFETY WARNING: POWER ADAPTER SPECIFICATION: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, Input: AC 100-240V, 50/60 Hz, 0.2A OR INJURY TO PERSONS Output: 13V DC, 0.4A with a Male DC Plug 1. Turn lamp off and WAIT UNTIL LAMP HEAD IS COOL before handling. 2. The LED panel (H) might get hot after several hours of continuous use DO NOT place your hands directly on LED light panel. 3. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord. 4. Do not alter the plug. 5. The lamp head included with this unit cannot be replaced by the consumer. 6. INDOOR USE ONLY. NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product. CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY. CAUTION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED. CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite's responsibility for proper function of product. PL-0119 REV042522