Tenda 4G03 Pro Quick Installation Guide
Brand: Tenda
Model: 4G03 Pro
Product Type: 4G LTE Router
Website: www.tendacn.com
Setup
1. Connect to power
Connect the power adapter to the router and plug it into a power outlet. The router will power on automatically.
Diagram Description: An illustration depicts the Tenda 4G03 Pro router connected to its power adapter, which is plugged into a wall socket. The router has two external antennas.
2. Insert SIM card
Insert a Nano-SIM card with an active internet connection into the SIM card slot on the router.
3. Connect to Internet
You can connect devices to the router wirelessly via Wi-Fi or via an Ethernet cable.
4. Connect clients
Connect your devices to the router via Wi-Fi or Ethernet cable.
Diagram Description: An illustration shows the Tenda 4G03 Pro router powered on. An Ethernet cable connects the router to a computer. The router's Wi-Fi signal is shown connecting to a smartphone and a laptop.
Troubleshooting
1. No Internet connection
Ensure the SIM card is properly inserted and activated. Check the signal strength indicator on the router.
2. Cannot access web interface
Verify that your device is connected to the router's network and that you are using the correct IP address.
3. Wi-Fi issues
Restart the router. Ensure the Wi-Fi password is correct.
FAQ
Q: How do I reset the router to factory defaults?
A: Press and hold the reset button on the back of the router for about 10 seconds while the router is powered on.
Q: What is the default Wi-Fi password?
A: The default Wi-Fi name (SSID) and password are printed on the label on the bottom of the router.
Product Information
Manufacturer: SHENZHEN TENDA TECHNOLOGY CO., LTD.
Certifications
The product complies with relevant European standards, indicated by the CE mark.
Diagram Description: A CE conformity mark is displayed.
Multilingual Support
This guide is also available in German, French, Italian, Spanish, Portuguese, Dutch, Russian, and Arabic.