Installation Guide for PROAIM models including: SC-07 Super Clamp Pro, SC-07, Super Clamp Pro, Clamp Pro
Proaim Super Clamp Pro with 5/8â Baby Pin. Fits 16mm-50mm Speed Rails
Proaim Super Clamp Pro with 5/8” Baby Pin. Fits 16mm-50mm Speed Rails — Business.proaim.be
User Manuals — Proaim.be
1 Super Clamp Pro with 5/8" Baby Pin (SC-07) Assembly Manual What's In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Super Clamp Pro Baby Pin Mount 2 x Allen Bolts (5 x 16mm) 1 x Allen key (4mm) All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher. 2 Super Clamp Pro Setup Baby Pin Mount Assembly · Attach the Baby Pin Clamp to the Super Clamp Pro. · Insert the Allen bolts (5x16mm) · Tighten the bolts securely using a 4mm Allen key. · The Baby Pin Clamp is now securely attached to the Super Clamp Pro. Super Clamp Mounting on Cart · Loosen the ratchet knob of the Super Clamp Pro and open it. · Remove the rubber bush from the clamp. 3 · Now attach the clamp to the rod (Not Included) and secure it by tightening the ratchet knob. · Super Clamp Pro is securely attached to the cart's rod (Not Included). Feature: The Super Clamp Pro allows the addition of a 5/8" Baby Pin to any post with a diameter ranging from 25-50mm / 1-2inch, including rods, C-Stands, and rolling stands. Screen Mounting · Mount the screen (Not Included) on the 5/8" baby pin receiver. Feature: Ideal for mounting monitors, hanging cameras, or securing accessories with a 5/8" baby pin. Super Clamp Pro mounting on Cart · Loosen the Allen bolts using a 4mm Allen key to remove the baby pin mount. · Rotate the clamp horizontally and then attach the baby pin mount to the clamp. · Insert the Allen bolts (5x16mm) to the insides of the clamp. · Securely tighten the bolts using a 4mm Allen key. 4 · Insert the rubber bush into the Super Clamp Pro to ensure a secure and stable fit. · Attach the clamp to the cart (Not Included) and tighten the ratchet knob to ensure it is securely fastened. Light Mounting · Mount the light (Not Included) onto the 5/8 baby pin receiver and tighten the knob to secure it . · The light is now securely mounted on the baby pin. 5 YOUR PROAIM SUPER CLAMP PRO WITH 5/8" BABY PIN ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please contact us immediately and we promise our utmost support and care until you use our product.Microsoft Publisher 2019