User Manual for iGear models including: Goldie Radio and Bluetooth Speaker, Goldie, Radio and Bluetooth Speaker, Bluetooth Speaker, Speaker

Backup of editable manual

Ravi Kaul

DOWNLOAD MANUAL

iGear Goldie Radio and Bluetooth Speaker With In -Built Mic For Calling|MP3 Player With USB, TF/SD Card & AUX Ports| 8Hrs Torch Light & Solar Charging|1200 MAh Rechargeable Battery With Playtime 3Hrs – igearworld.com

iGear Goldie Radio and Bluetooth Speaker With In -Built Mic For Calling|MP3 Player With USB, TF/SD Card & AUX Ports| 8Hrs Torch Light & Solar Charging|1200 MAh Rechargeable Battery With Playtime 3Hrs – iGear World

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 1.72MB

Document Document

GOLDIE
Bluetooth Speaker

USING OPERATION
RADIO: ON/OFF Button Push the button to turn on the speaker
Press the "M" button to choose from FM m ode/Aux/ Mp3 mode.
Scan and Save Stations Long press the Play/Pause ( ) button to scan and save the available radio stations. Short press Next (+) or Prev(-) button to switch between the saved stations.
ANTENNA: For FM and AM reception, a telescopic antenna has been provided and for SW reception a ferrite antenna has been built-in. These antennas are direction oriented and it is recommended to rotate the set for proper signal reception.
SOLAR PANEL: A solar panel is provided on the back of the speaker to charge it using solar energy.

MEDIA PLAYER: Press the Mode (M) button to switch to Bluetooth/MP3 mode. You can play music by connecting via bluetooth or by inserting TF/SD card or USB drive.
Short press the Next/FF (+) or Prev/Rew (-) button to choose the desired song. Long press the Next (+) or Prev (-) button to adjust to the desired volume level.
BLUETOOTH: Change from FM mode to Bluetooth mode by pressing the Mode (M) button. Once in bluetooth mode the voice prompt will say "Welcome to iGear Music"
Turn on the bluetooth of your device (mobile/tablet) and search for the name "iGear Goldie" and connect it.

POWER OPERATION
DC OPERATION: Plug in one end of charging cable into the radio and other end into a USB adapter or other charging source to charge the radio.
Note: Please make sure that the charging current mentioned on the set corresponds to the voltage of the charging source.

SPECIAL ATTENTION
Warning sign alerting the user of important instruction accompanying the product.
Warning sign alerting the user of dangerous voltage inside the unit.
This unit must not be exposed to moisture or rain.
Ensure all connections are properly made before operating the unit.
This unit should be positioned so that it is properly ventilated. Avoid placing it for example, close to curtains, on the carpet, on bed sheets, or in a built-in installation such as a bookcase.
Do not expose this unit for too long to direct sunlight or heat radiation sources.