Instruction Manual for HYTRONIK models including: HDP02, DALI Panel Controller, HDP02 DALI Panel Controller
HDP02 DALI Control Panel (Scene Controller) Hytronik
Nástenný ovládací panel DALI, 6 scén, On/Off, dim /-, IP20, DALI bus napájanie | Svietidlá a osvetlenie | Ledco.sk
Installation and Instruction Manual HDP02 DALI Panel Controller 35 HDP02 is a self-contained DALI scene controller with 6 programmable scene memories. Featuring a fully integrated 80mA DALI power supply capable of controlling up to 30 devices. DALI -+ NL 11.5 86 Technical Specifications Product type DALI panel controller Operating voltage 220~240VAC / 50Hz Load Max. 80mA (30-40pcs DALI dimmer) Stand-by power < 0.5W Operating temperature -20oC ~ +55oC IP rating IP20 86 Using the DALI panel 25% 100% 4 7 3 8 2 1 9 5 6 50% 75% ON/OFF and Nightlight Function 1. ON/OFF: short press button 1 to turn light ON and OFF, the last selected scene (light level) controls. 2. Nightlight: press the button 1 for 2 seconds, the nightlight on the panel goes to permanent on mode, press this button 2 seconds again to turn nightlight off. Long press the button for 5 seconds to adjust the light level. Scene Selection Press any button of 3 5 7 9 to select a scene, the default light level is as below: SC0: 100% SC1: 75% SC2: 50% SC3: 25% Note: the light level can be adjusted, please refer to "Programming Scenes". Programming Scenes Step 1: Press button 8 , the LED indicator flashes slowly for indication of program mode. Step 2: Press any scene button of 3 5 7 9 which needs to adjust light level. Step 3: Press button 4 or 6 to get the target light level. Step 4: Press button 2 , the LED indicator will flash rapidly to indicate successful saving. Note: the program mode can be cancelled by short press button 8 or just leave it alone 10 seconds if misoperation. Light Level Reset If the user-defined light level is not available, the below steps can reset it to default setting. Step 1: Short press button 8 to go to program mode. Step 2: A: Long press any scene button for 5 seconds, the brightness goes back to default light level accordingly, the LED indicator flashes rapidly for successful operation. B: Long press button 2 for 5 seconds, the brightness of all scenes (SC0-SC3) goes back to default light level accordingly, the LED indicator flashes rapidly for successful operation. Wiring Diagram N L LN - + DALI DALI driver - + NL DALI HDP01 HDP02-20161124-A1Adobe PDF library 15.00 Adobe Illustrator 25.0 (Windows)