Products For People With Special Needs | Enabling Devices
User Guide for enabling models including: 990, Tilt Switch, 990 Tilt Switch, Switch
Pediatric Universal Assistive Technology Tilt Switch
File Info : application/pdf, 2 Pages, 40.51KB
DocumentDocumentTilt Switch #990 USER'S GUIDE For Technical Support: Call our Technical Service Department Monday through Friday, 9 a.m. to 5 p.m. (EST) 1-800-832-8697 customer_support@enablingdevices.com 50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com Perfect for posture training! Attach this gravity-sensitive switch to a head, arm or leg and when the body part is tilted, it will activate (or deactivate) a toy or device. The switch can be adjusted for tilt sensitivity and can be used for posture training. Comes complete with an adjustable Velcro strap. Size: 3"L x 2"W x 1"H. Weight: 2 oz. SET UP AND OPERATION: 1. Attach the tilt switch to the body extremity (e.g. head) via the provided adjustable black band, taking note of the small Velcro section on the band, that is where you will place the tilt switch. 2. Attach the tilt switch to the toy or device you want to use via the 1/8th cord jack. 3. The tilt switch has no on/off button, it's neutral setting is achieved by having the black cord attached to the switch facing the floor, meaning the switch will not activate the toy or device attached to it in this position. A forward or backward tilt from this position with cause activation of the device or toy. Sensitivity can be adjusted by changing the angle of the switch in either direction. 4. A finger band is also included with this switch, and is adjustable. The tilt switch attaches on the outside of the finger band (the fuzzy side) of the band. Care of Unit: The tilt Switch can be wiped clean with any household multi-purpose cleaner and disinfectant Troubleshooting: Problem: Tilt switch does not work. Action: Make sure that there is a TIGHT connection between the switch and the device or toy (there should be NO gaps). Especially check this out when using adapters (if applicable). Any gaps will cause the unit to function incorrectly or not work at all. Rev 2/16/17