Contact Us | Uniden® Cellular Signal Boosters
Consumer Signal Booster RegistrationContact Us | Cellcom
Installation Guide for Cellcom models including: U60C, U65C, U60C U65C Cellular Booster, U60C U65C, Cellular Booster, Booster
10 giu 2024 — Finding the best cellular signal. RSRP is a metric used to measure the power of the cellular signal that your smartphone receives from the nearby cell tower ...3 pagine
File Info : application/pdf, 3 Pages, 306.20KB
DocumentDocumentUniden Supplemental Installation Guide Thank you for your purchase. For the best experience, please follow the manufacturer's instructions. In instances where the instructions reference "Find the Area with the Best Cell Signal", please use the following information to assist you. Finding the best cellular signal RSRP is a metric used to measure the power of the cellular signal that your smartphone receives from the nearby cell tower. The power of your cellular signal directly impacts the performance of your cellular booster. Use your Cellcom smartphone, along with the chart, recommended antenna direction and instructions below, to find the location outside your home where RSRP is the strongest. Installation Address: ____________________________________________________________ Recommended Antenna Direction: ________________________________________________ Point the outdoor antenna to the direction of the best signal. If you cannot find an area outside your home with a signal, this solution is not likely to improve your indoor service. 1 Revised 6/10/2024 Apple iPhone 1. Confirm your Cellcom phone is not connected to Wi-Fi 2. Open the Phone app 3. Dial *3001#12345#* then tap Send 4. Tap RsrpRsrqSinr 5. Monitor the RSRP value as you walk around the exterior of your home and note where the signal is the strongest. If RSRP is not in your menu, please restart phone and attempt again. Location:________________________________________ Signal Strength (RSRP):_____________________________ Figure 1 - Field test mode as viewed in iOS 17, if you have a different iOS version, the menu options may vary. Android Smartphone 1. In the Google Play Store, search for the Network Cell Info Lite application by M2Catalyst 2. Download and open the Network Cell Info Lite application and accept all permissions 3. Confirm the Gauge tab is selected along the top 4. Monitor the RSRP, db value as you walk around the exterior of your home Location:_________________________________________ Signal Strength (RSRP):______________________________ 2 Revised 6/10/2024 Support Information Uniden Support Uniden Support Site: https://unidencellular.com/contactus Uniden U60C & U65C Quick Install Overview: https://unidencellular.com/media/pdf/UnidenManual_QuickInstall_2016_ENG+FR.pdf (Link could change for new file) Uniden U60C & U65C Instruction Manual: https://unidencellular.com/media/pdf/Uniden-U60C4G-U65C4G-User-Manual.pdf (Link could change for new file) Cellcom Customer Care Support Center: https://www.cellcom.com/contact Phone: 800-236-0055 or 611 from your Cellcom phone Cellular Booster Registration Once you have installed your cellular booster, you will need to register it with Cellcom. This will automatically grant you the approval required by the FCC to use a commercial cellular booster. Registration Link: Cellcom Consumer Signal Booster Registration: https://www.cellcom.com/boosterRegistration.html Cellcom Professional Installation Available If you would like assistance with installing your booster, we offer installation for the cost of $130. To schedule an appointment for a technician to come to your house, please call Customer Care at 800-236-0055. 3 Revised 6/10/2024