Aeotec Z-Stick 10 Pro (ZWA060)

Z-Wave & Zigbee 3.0 Controller

Important Safety Information

Please read this and the online guide(s) at support.aeotec.com/zs10Pro carefully.
Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law.
The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instruction in this guide or in other materials.
Z-Stick 10 Pro is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations.

Features

Z-Wave® 800 Series and Zigbee 3.0 Controller.
Creates two separate serial ports for individual Zigbee/Z-Wave setup.
Supports Windows, Linux, and MacOS.

Quick Start

Plug Z-Stick 10 Pro into your PC USB port. This will create two serial ports for Zigbee and Z-Wave individually.
Windows: Under Ports & LPT in Device Manager. Z-Stick 10 Pro shows as two COMx devices (where X can be 0-1000).
Linux: In cmd prompt, enter "dmesg | grep tty". Z-Stick 10 Pro typically shows as /dev/ttyUSBO and ttyUSB1.
MacOS: Choose Apple > System Preferences, then click Network. Z-Stick 10 Pro appears as two USB Modem devices (/dev/cu.usbmodem).

Setup with Home Assistant

Compatible with Home Assistant.

Get Help & Learn More

Find more in-depth setup guides and other helpful information for Z-Stick 10 Pro by scanning the QR code [Scan QR code for detailed guides] or visiting Aeotec's support articles at support.aeotec.com/zs10Pro.
Guides include setup for various compatible smart home software.
If you encounter issues using Z-Stick 10 Pro, visit support.aeotec.com/zs10Pro or contact Aeotec's support team via aeotec.com/contact.

Specifications

Z-Wave operates between 868.40 & 926.3 MHz (depending on local restrictions) with up to 14 dBm ERP transmission power.
Zigbee operates between 2405MHz - 2480MHz with up to 17.02 dBm transmission power.
Full information on device specifications and certifications is available at aeotec.com/Support.

Declaration of Conformity

Aeotec Limited declares that ZWA060 is in compliance with the essential requirements and other relevant provisions of RED 2014/53/EU, RoHS 2011/65/EU, IEC 62321:2008, E50581:2012 and ErP Directive 2009/125/EC. The full text of the declaration is available from aeotec.com/Support.

About Aeotec

Aeotec Limited is the owner of Aeotec, the Aeotec logo, and a number of other patents and trademarks utilized by products distributed by Z-Wave Europe and Aeotec Group.

Manufactured by Aeotec Ltd., Building A, QianWan 1st Road, Qianhai, Shenzhen, China.
EU Entity: Aeotec Group GmbH, Rathausmarkt 5, 20095 Hamburg, Germany.
EU Importer: Z-Wave Europe, Antonstraße 3, 09337 Hohenstein-Ernstthal.

Contact: service@aeotec.com | www.aeotec.com

	Aeotec Z-Stick 10 Pro (ZWA060) Quick Start Guide and Specifications Quick start guide and technical specifications for the Aeotec Z-Stick 10 Pro (ZWA060), a Z-Wave 800 Series and Zigbee 3.0 controller for smart home automation. Learn about setup, safety, and compatibility.
	Aeotec Z-Stick 10 Pro Engineering Specification This engineering specification details the Aeotec Z-Stick 10 Pro, a dual Z-Wave Plus and Zigbee 3.0 USB adapter. It covers interfaces, features, structural, hardware, and software characteristics, quick start guide, and software function definitions.
	Aeotec Z-Stick 10 Pro: Z-Wave and Zigbee 3.0 USB Adapter Engineering Specification Detailed engineering specification for the Aeotec Z-Stick 10 Pro, a dual Z-Wave Plus and Zigbee 3.0 USB adapter. Covers interfaces, features, structural and hardware characteristics, software functions, and quick start guide.
	Aeotec Z-Stick 10 Pro (Z-Wave/Zigbee 3.0 USB Adapter) Engineering Specification Comprehensive engineering specification for the Aeotec Z-Stick 10 Pro, a dual Z-Wave Plus and Zigbee 3.0 USB adapter. Details product features, structural and hardware characteristics, software specifications, installation guide, and function definitions.
	Aeotec Z-Stick 10 Pro User Guide: Z-Wave & Zigbee Home Automation Setup Comprehensive user guide for the Aeotec Z-Stick 10 Pro, a powerful USB adapter for Z-Wave Plus Series 800 and Zigbee 3.0 smart home networks. This guide covers installation with Home Assistant, advanced features like Z-Wave Long Range and SerialAPI-Mode, and essential safety precautions.
	Aeotec Z-Stick Gen5+ User Guide: Setup, Pairing, and Advanced Features Comprehensive user guide for the Aeotec Z-Stick Gen5+ USB controller. Learn setup, pairing Z-Wave devices, exclusion, using third-party software like Domoticz, advanced backup features, and factory reset procedures.
	Aeotec Z-Stick Gen5+ User Guide: Setup, Features, and Z-Wave Control Comprehensive user guide for the Aeotec Z-Stick Gen5+, covering setup, LED indications, pairing/unpairing Z-Wave devices, software integration, backup tools, and factory reset procedures.
	Aeotec Smart Switch 6 Z-Wave Protocol Implementation Conformance Statement This document details the Z-Wave protocol implementation conformance statement for the Aeotec Smart Switch 6, including general information, product features, Z-Wave product information, and technical details.