PeriPage Wireless Tattoo Transfer Printer

User Manual

Product Overview

This document provides instructions for the PeriPage Wireless Tattoo Transfer Printer.

Product Sketch:

1 Power Button: Press and hold for 2 seconds to turn on/off. Double-click to print device connection QR code. Click to terminate printing.
2 Type-C Interface: Charged with power bank or mobile phone charger.
3 Lid Open Button: Press to open the lid to unload paper.
4 Paper Exit Slot
5 Paper Input Tray

Power Indicator Status:

Green light constantly on: Ready to print
Green light breathing: Charging
Green light flashing slowly (once per second): Out of paper/Overheating
Green light flashing quickly (twice per second): Low battery, please charge promptly

Paper Installation Instructions

Ensure the lid is closed tightly.
Press and hold the power button for 2 seconds to turn on.
Align with the paper feed slot and insert until it is drawn in and cannot be pulled out. (Note: If a paper jam occurs, press the lid open button to remove the paper.)

App Printing

Step 1: App Download

Please search for [PeriPage] on Google Play or App Store, or scan the QR code to download the App. Then watch the video guide.

Step 2: App Connects to Printer

Press and hold the power button for 2 seconds to turn on the printer.
Open the [PeriPage] App, enter the device connection interface, and click [Bluetooth Printing] to connect the printer. Alternatively, press the power button twice to print the QR code, then connect the printer by scanning the code. (Tips: Do not connect the printer in the mobile phone's Bluetooth settings.)
After the printer is connected, open the function provided by the App to operate Bluetooth printing.

PC Printing

Press and hold the power button for 2 seconds to turn on the printer. Connect the printer and computer with the original Type-C data cable.
Visit the official website https://www.ileadtek.com/en/download.html to download and install the printer driver for editing and printing.
After the driver is installed, select this printer when printing documents on the computer.

Charging Instructions

Input: 5V-2A. It is recommended to use a mobile phone charger for charging.
It is recommended to fully charge the battery before use.
To avoid natural degradation and inability to charge, please recharge the battery every 3 months during periods of non-use.

Notes

If an incorrect battery type is replaced, there is a risk of explosion. Do not expose the battery to excessive heat sources such as sunlight, fire, or similar conditions, and avoid exposing it to extremely low pressure, as this may lead to explosions or leakage of flammable liquids or gases.
The paper tearing blade has a sharp edge. Do not touch it to prevent getting cut.
After printing, avoid direct contact with the print head to prevent overheating and potential scalding. Wait for at least thirty minutes after turning off the power before attempting to touch the print head.
The product is not suitable for children!

Clean the Printer Head

Please turn off the printer and open the printer lid and take out the paper.
Dip a cotton cloth or cotton swab with medical alcohol, and wipe gently along the center to the periphery of the printer head.
After cleaning the printer head, do not use the printer immediately. Please wait for 1 to 2 minutes, use the printer after the alcohol has completely evaporated.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by SAGE HUMAN ELECTRONICS INTERNATIONAL CO.,LTD may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF exposure statement: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & you body.

“三包”服务政策 (China Mainland)

For appearance issues or performance failures not caused by human damage, national three-guarantee services are provided. From the date the consumer signs for receipt:

Within 7 days: return, exchange, or repair.
Within 15 days: exchange or repair.
Within 1 year: free repair.

Not covered by “three guarantees” service scope:

Damage caused by force majeure.
Unauthorized repair/disassembly.
Long-term (about 3 months) non-charging may cause the battery to naturally deplete and be unable to activate charging.

Electronic Information Product Hazardous Substance Statement:

Hazardous Substance or Element	Plastic Shell	Circuit Board	Internal Cable	Battery
Lead (Pb)	○	○	○	○
Mercury (Hg)	○	○	○	○
Cadmium (Cd)	○	○	○	○
Hexavalent Chromium (Cr6+)	○	○	○	○
Polybrominated Biphenyls (PBB)	○	○	○	○
Polybrominated Diphenyl Ethers (PBDE)	○	○	○	○

This table is compiled according to SJ/T 11364.

○: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572.

×: Indicates that the content of this toxic substance in at least one homogeneous material exceeds the limit requirements specified in GB/T 26572.

Environmental Protection Use Period: The environmental protection use period of this product is 10 years. It can be used with confidence during the environmental protection use period. After the environmental protection use period expires, it should enter the recycling system.

Product Warranty Card (Main Card)

Manufacturer's Copy

Product SN Code:
User Name:
Contact Information:
Purchase Date:
Sales Terminal:

Repair Date	Fault and Treatment	Repairman

Note: This warranty card is only valid for mainland China.

Product Warranty Card (Copy)

User's Copy

Product SN Code:
User Name:
Contact Information:
Purchase Date:
Sales Terminal:

*Note: This warranty card is only valid for mainland China.

	PeriPage Tattoo Transfer Printer User Manual - ALD-P920 User manual for the PeriPage Tattoo Transfer Printer (Model ALD-P920) by Xiamen iLead Tek Co., Ltd. Covers setup, operation, app connectivity, PC printing, charging, maintenance, and safety precautions.
	PeriPage P21 Thermal Printer User Manual User manual for the PeriPage P21 thermal printer, covering setup, operation, charging, cleaning, and safety information.
	PeriPage Mini Printer ALD-A300 User Manual and Instructions Comprehensive guide for the PeriPage Mini Printer ALD-A300, covering setup, paper changes, charging, app and computer printing, and printer head cleaning. Includes technical specifications and FCC compliance information.
	PeriPage Portable Label Printer Instruction Manual Instruction manual for the PeriPage portable label printer, covering product features, app connection, paper changing, charging, cleaning, and safety information.
	PeriPage Translation Pen ALD-D200 User Manual: Setup, Features, and FAQ Official user manual for the PeriPage Translation Pen (Model ALD-D200) by Xiamen iLead Tek Co., Ltd. Covers setup, WiFi connection, scanning, app sync, TF card usage, charging, troubleshooting, and FCC compliance.
	PeriPage Wireless Tattoo Transfer Printer User Manual & Guide Official user manual for the PeriPage Wireless Tattoo Transfer Printer (P90). Learn setup, app connection, PC printing, charging, maintenance, and safety. Includes troubleshooting tips and FCC compliance information.
	PeriPage P90 Tattoo Printer Specifications and Overview Detailed specifications and features of the PeriPage P90 Tattoo Printer, including printing method, resolution, connectivity, battery, and operating conditions. Learn about this portable thermal printer for tattoo designs.
	PeriPage Mini Printer Instruction Manual Instruction manual for the PeriPage Mini Printer, covering product features, setup, printing, and maintenance.