User Guide for symcode models including: MJ-370, MJ-370 Desktop Barcode Scanner, Desktop Barcode Scanner, Barcode Scanner, Scanner
Shenzhen Alacrity Barcode Technology Co., Ltd MJ-370 Scanning platform 2A4TH-MJ-370 2A4THMJ370 mj 370
M J-370 Desktop Barcode Scanner Sim ple Guide Scanner Settings System Settings Rest o r e Ver si o n Interface Settings o r an g e blue white / versionMJ-370 USB Sensitivity Setting Lo w Norm al High Extra High Volum e Settings Level 1(Lowest) Level 2 Fill Light Settings ±On w hile scanning : t he f ill lig ht is o n w hen t he scan m o d ule w o rking , and it g o es o ut at o t her t im es. ±Alw ays o n: The f ill lig ht w ill co nt inue t o g lo w af t er t he scan m o d ule is t urned o n. ±Alw ays o f f : The f ill lig ht w ill no t t urn o n und er any circumstances. Level 3(Default) Level 4(Highest) Virtual Keyboard Settings After enabling the virtual keyboard in the Windows, the correct data can be output in any keyboard language. However, a certain output efficiency will be lost. Note that when using the virtual keyboard, user m ust ensure that the key of Num Lock is enabled on the keyboard. Light on while scanning Light always on Light always off Sound Settings Standard Keyboard Virtual Keyboard Turn off sound Turn on sound Turn off voice Turn on voice End Characters None Add Carriage Return Enhanced Decoding Settings After the Enhanced Decoding is enabled, the ability to read special codes such as stained bar codes and QR code on curved surfaces can be im proved. Disable Enhanced Decoding will increase the decoding speed. NFC Function Settings (Optional) NFC Function Settings In the Continuous M ode, the content output of the card num ber is controlled by the following setting codes. NFC End Characters *Turn Off End Character (Reading card) *Add Carriage Return (Reading card) Add Tab Add Line Feed Readable Barcode Type Users can read the following setting codes to enable/ disable reading all sym bologies and enable the default supported sym bologies. After disable all sym bologies , only setting codes are allowed to be read Enable All Code Types Enable Enhanced Decoding Disable Enhanced Decoding *Reverse Output * Fo r w ar d Output Output Data Encoding Form at Set the output form at by scanning the following setting codes to enable the scan m odule to output Chinese data in accordance with the specified encoding form at. Note: GBK form at is used for Notepad, and UNICODE form at is used for Word and com m on chat tool input boxes. Original data output, serial port output for encrypted data. *Hexadecim al Output *Decim al Output Data Encoding Form at (GBK) Data Encoding Form at UTF8 *Decim al Output (Not filled with 10 digits) *Decim al Output (Filled with 10 digits) Use the following setting codes to control whether the 8- bit or 32-bit code content output is 0. Set the scan code output to 0, and the scan code result is 00000000 Default Disable All Code Types Data Encoding Form at Original Data Encoding Form at (UN ICODE) *8-bit/ 32-bit code (Output is not 0) *8-bit/ 32-bit code (Output is 0) *Add TAB (Reading card) *Add Carriage Return and TAB (Reading card) Disclaim er The com pany does not assum e any responsibility for losses caused by natural disasters (such as earthquakes, floods, etc.) that exceed our ability to act . The com pany is not responsible for any product liability associated with or arising from the application or use of any product, circuit, or other application described herein.About the system , equipm ent, m achinery, m aterials, m ethods or processes that m ay be used in this product, or any com bination with this product, the com pany does not express, im ply, estoppel perm ission in any other m eans in connection with a patent or patent. The com pany only provides im plied licenses for the equipm ent, circuits and subsystem s included in its products. The com pany does not assum e any responsibility for the loss caused by im proper use of com m unication hardware or software not sp eci f i ed . The com pany does not assum e any form of guarantee and technical support responsibility for third-party software used by this product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restrictionAdobe PDF library 15.00