AUTOMATIC PET FEEDER WITH WIFI

Features of Automatic Pet Feeder

• Imported Environmental Protection ABS Materials.
• Dual Power supply: external power supply and battery mode.
• Detachable food tank which is easy to clean.
• With accurate dispense, the feeder can keep your pets in good health, and the stainless steel food tray is also easy to clean.
• Special button protection design, your feeding schedules won't be changed even if your pets accidentally touch it.
• User-friendly design makes it easy to set up, voice record function helps you care your pets in anytime.
• The base is Stable and anti-skidding which can better protect your pets.

Assemble and Use

1. Filling Food Tank:

   Fill food tank with dry pet food. Close the lid and it will snap into place due to gravity.

   Note:

   • Do NOT use canned, wet or moist pet food.
   • Recommend kibble size ranging from 2-10mm/0.07-0.4in in diameter.

2. Placing Desiccant Bag:

   The desiccant bag can remove the moisture and odor inside the tank, protect the pet food from oxidation damage, and always be fresh.

   Note:

   • It's recommended to use a desiccant bag and change them every 15 days in case of mold.
   • Please remove the desiccant bag before cleaning the lid.
   • For a better antioxidant effect, tear off the sealing film outside the small package only when you use it.

3. Assembling Bowl Holder & the Bowl:

   Put the bowl holder and bowl out from the feeder food tank and install them in the correct position.

4. Connecting Power:

   • Insert the 5V power adapter into a wall socket. Plug in the power socket of the feeder.
   • Open the battery compartment at the bottom of the unit, and install 3 alkaline D batteries (not included) in case of outage.
   • The LCD display will light up automatically indicating the feeder is on now.

   Note:

   • Battery NOT included.
   • Before connecting to power, make sure all parts are clean and completely dry.
   • The battery should power with an output of 4-5V; the battery level icon on the display blinks on a low battery level (<4V).

Function Introduction

Revolving Lamp

• Blue Light: Flash: Flash twice per second, add WiFi quickly. Slow flash: flash once every 3 seconds, hot spot connection. It's always on: Network connection successful.
• Blue Light: Usually it's not bright. Limit switch detection abnormal flashing red light. Flash twice when unlocking/locking.

Key Operation

• Microphone Button: Press and hold to record sound, release to stop. Maximum recording time is 10 seconds.
• SET Key: Press and hold for 7 seconds to switch to hotspot connection mode. Press and hold again to restore factory settings.
• FEED Key: Short press to dispense one portion of food. Press and hold for 10 seconds to lock the machine; press and hold again to unlock.

WiFi Intelligent Pet Feeder Smart App Specific Operation

Recording settings

After the feeder is configured, a recording can be added to the feeder. This recording will be played every time you press the feeding key manually or automatically to remind the pet that the feeding time is up. Press and hold the microphone button and start recording. After recording, release the button to send out two "didi" prompts to complete the recording. The recording time is up to 10 seconds. If you are not satisfied, you can repeat this operation to cover the previous recording.

AP mode configuration (optional)

If the configuration is not successful, please switch to AP mode for configuration. In the mode of waiting for connection, the status indicator is flashing rapidly. Press and hold the "reset" key for 7 seconds to give out three sounds of "drop, drop, drop". After letting go, the indicator light will switch to slow flashing, and then enter AP mode. Open the mobile app, select Add Device-Manual add-small household appliances-pet feeder, select other methods-hot distribution network in the upper right corner of the interface, fill in the WiFi password according to the prompt, and then enter the WiFi interface of the mobile phone to connect to a WiFi signal of smartlife XXX. After selecting and connecting the hotspot signal, return to app and wait for the connection to complete.

Sharing device steps:

1. Download the app and sign in with your exclusive account.
2. Add Device: After entering the interface, wait for the device to be discovered automatically and click "add".
3. Enter Wi-Fi Password: Input WiFi password (username cannot use Chinese, password cannot take special symbol). 2.4G/5G WiFi signal is supported.
4. Meal Plan: In the main interface, you can set the time and the number of servings according to your pet's eating pattern. You can choose from Monday to Sunday every day and click save.
5. Device Sharing: Click "add share" and enter the app account of the other party to share the device with multiple people.

Simple trouble shooting of pet feeder

1. Cannot connect:

   • The WiFi name and password should not be in Chinese or more than 12 digits. Please use a combination of numbers and letters. 5G WiFi signal is not supported. Please use 2.4G WiFi signal.
   • Some community broadband, radio and television broadband, multi-level network or mobile Tietong network, due to network restrictions, the feeder can not connect to the network server, so it is recommended to use Telecom or Unicom Network.
   • Some software conflicts in the phone will also cause connection failure. Please restart the phone. Turn off the non mobile system software that starts with the phone, turn on Bluetooth and location, and then try reconnecting to the feeder.

2. Inaccurate or not feeding:

   Please check whether there is too much food in the food plate and whether the food channels is blocked. Please clean the food outlet and channels.

3. Device shows offline:

   Please check the distance between the device and the router at home. Do not exceed 10 meters. Try not to partition the middle. According to WiFi characteristics, the WiFi signal on the partition wall will drop sharply, resulting in unstable connection offline.

4. No response after starting the machine:

   Check whether the power supply is plugged in and whether the power switch is turned on. If they are all plugged in, please check whether the power supply is damaged, contact customer service to buy the power supply or return to the factory for maintenance according to the judgment.

5. Notes:

   • There is a Low Battery indicator on the left side of the control panel. When you go out or on a business trip, make sure if the voltage indicator light is on. If there is a light or flashing light when discharging or sounding, please replace the battery in time to prevent your pet from starvation.
   • Do not put your fingers into the machine at any time.
   • This product uses 3xD alkaline batteries.
   • Please dispose of old batteries in accordance with national regulations (pay attention to environmental protection). When the feeder is not used for a long time, please remove the battery to prevent the electrolyte from leaking out.
   • Do not add semi-dry or wet pet food, this product can only use dry pet food.

How to clean the feeder

This product cannot be placed outdoors or exposed to the rain. Please use a wet cloth to clean it and prevent water from entering the feeder. If you need to open the food tank, please pull out the head of the robot with strength. The food tank and food bowl can be washed by water.

Not Washable: Feeder body

Washable: Food tank and food bowl