Logitech Marathon Mouse M705

Getting Started

The basic features of your Logitech Marathon Mouse M705 will work without installing the software. However, to enable features like Side-to-Side Scrolling and Application Switch, or to personalize your mouse settings, you will need to install the software. Mac® users will also need the software to enable the back, forward, and middle button functions.

To get the latest software for your mouse, visit: www.logitech.com/downloads

Note for Mac® OS X Users: When plugging in the Unifying receiver, a Keyboard Assistant dialog box may appear. You can simply close this window.

Mouse Features

1. Scroll Wheel: Press for middle button functionality. Tilts for side-to-side scrolling.
2. Scroll Wheel Mode Shift Button: Press to switch between hyper-fast (free-spinning) and precision (click-to-click) scrolling modes.
3. Back and Forward Buttons: Press to navigate between web pages.
4. Application Switch: Press the rubber grip to switch between applications.
5. Battery Indicator Light: Turns red when approximately two weeks of battery life remain.
6. On/Off Button: Slide to turn the mouse on and off.
7. Battery Door Release: Press where indicated and slide the door off the mouse. To reduce weight, you can install a single battery.
8. Laser Engine: Provides smooth, responsive, and precise cursor control.
9. Slots: Used to remove worn mouse feet.

*Application Switcher and side-to-side scrolling require Logitech software. Depending on your operating system, the back, forward, and middle buttons may also require Logitech software.

Help with Setup

Pointer does not move at all?

1. Ensure the power switch is in the ON position.
2. Check battery polarity and power. Turn the mouse OFF and then ON. If the battery indicator light glows red or does not glow at all, replace the batteries.
3. Try plugging the Unifying receiver into a different USB port.
4. Try reconnecting the mouse and Unifying receiver using the Logitech Unifying software (refer to the Unifying section of this guide).

Erratic pointer movement or missed button clicks?

1. Try using the mouse on a different surface.
2. Remove any metallic objects between the mouse and the Unifying receiver.
3. If the Unifying receiver is plugged into a USB hub, try plugging it directly into your computer.
4. Move the Unifying receiver to a USB port closer to the mouse, or visit www.logitech.com/usbextender for a USB extension stand.

If these tips do not resolve the issue, contact Logitech Customer Support at www.logitech.com/support.

Plug it. Forget it. Add to it.

You have a Logitech Unifying receiver. Now you can add a compatible wireless keyboard that uses the same receiver as your mouse. It's easy: start the Logitech Unifying software and follow the on-screen instructions.

For more information and to download the software, visit: www.logitech.com/unifying

• PC: Go to Start / All Programs / Logitech / Unifying / Logitech Unifying Software
• Mac: Go to Applications / Utilities / Logitech Unifying Software

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

China RoHS: The product contains hazardous substances as defined by the China Management Methods for the Pollution Control of Electronic Information Products. The table indicates the presence of these substances in the product.

Taiwan RoHS: Complies with the Taiwan "Low-power Radio-frequency Devices Management Regulations".

Korea: M/N: C-U0007, C-U0008. Rating: 5V 100mA. Approval No.: ETA-418/2010/WRLO, ETA-1115/2011/WRLO. CMIIT ID: 2010DJ0355, 2011DJ1853. KCC-CRM-DZL-C-U0007, KCC-CRM-DZL-C-U0008. CCAI10LP0020T1, CCAI11LP0640T0. IDA Standards 00101104.