Introduction
This document provides a quick guide for the MikroTik mANTBox 52 15s wireless network device. It outlines essential steps for setup, configuration, and important safety information to ensure compliance with local regulations and safe operation.
The guide is available in multiple languages, including English, Bulgarian, Czech, Danish, and Greek, catering to a diverse user base.
Key Information
- Ensure your device is running the latest stable RouterOS version for regulatory compliance.
- End-users are responsible for adhering to local country regulations regarding frequency channels, output power, and cabling.
- For detailed user manuals and software configuration guides, please visit the official MikroTik website.
- Technical specifications, brochures, and further product information can be found at mikrotik.com/products.
- Configuration assistance is available through consultants at mikrotik.com/consultants.
Getting Started
Follow the initial steps to connect and configure your mANTBox 52 15s:
- Open the cover and connect the Ethernet cable from your computer to the device's Ethernet port.
- Plug the device into a power source.
- Download the WinBox configuration tool from mt.lv/winbox.
- Connect to the device using the default IP address (192.168.88.1) or MAC address via the Neighbors tab.
- Configure the device for an active internet connection.
- Upgrade the RouterOS software to the latest version.
- Select your country in the QuickSet menu to apply local regulatory settings.
- Adjust antenna gain and set the installation to 'Outdoor' if necessary.
- Set up strong wireless network and router passwords.
Safety Precautions
MikroTik equipment should only be handled by trained and qualified personnel. Always be aware of electrical hazards and follow standard safety practices. Use only manufacturer-approved power supplies and accessories. Improper installation or use can lead to hazardous situations and system damage. Operate the device with care and at your own risk.