HomeWorks System Architecture for 120VAC and 434 MHz Regions

HomeWorks System Capacities

¹device - Any system component that requires a single address. The processor reserves a single address on every link. Four addresses are reserved for hybrid repeaters on the wireless link.

²zone - An output. An individual shade or dimmer/QSG/contact closure output. Example: A GRAFIK Eye QS would be one device that could have up to six zones.

HomeWorks Processor

Key - Wiring

Network link (Ethernet): Standard Ethernet wiring (328 feet max) used to connect processors to network, 10/100 Mbit Ethernet.

QS wired link*: Standard Lutron 4 conductor cable*

Clear Connect - Type A link*: Two pair: one pair #18 AWG, one pair #18-22 AWG twisted shielded. Pin-out: pin 1 common, pin 2 - VDC, pin 3 - MUX, pin 4 - MUX.

Ketranet PLC:

HomeWorks Digital Lighting (2 conductor):

Palladiom HVAC Controller (3 conductor):

Shade wiring (4 conductor)**:

Shade wiring (2 conductor)**:

Clear Connect - Type X link:

*GRX-CBL346S-500 Two pair: one pair #18 AWG.

**The wire gauge required for shade power conductors is dependent on shade size and number, wire run length, and power supply type being used. Consult technical specifications of shade equipment for details.

***One pair 22 AWG twisted, shielded, Class 2 wires (max home run 500ft. per local control, not to exceed 1000 ft. total per bus).

Key - Power

  1. Line voltage 120VAC
  2. Low voltage 24 VAC
  3. Low voltage 24-35 VDC
  4. Low voltage 12VDC
  5. Plug-in transformer for Ketra devices
  6. Battery powered
  7. Power over Ethernet (PoE)

Clear Connect Wireless - Type X

Components shown:

Ivalo Fixtures

Components shown:

Clear Connect Wireless - Type A

Components shown:

Models: HomeWorks System Architecture for 120VAC and 434MHz regions

File Info : application/pdf, 1 Pages, 5.74MB

PDF homeworks system architecture

References

Adobe PDF Library 15.0

Related Documents

Preview Lutron HomeWorks QS System Architecture for 240VAC and 434/868 MHz Regions
A comprehensive overview of the Lutron HomeWorks QS system architecture, detailing its capacities, processor, network, panel, wired, and wireless link components for 240VAC and 434/868 MHz regions, including key wiring and power configurations.
Preview Lutron HomeWorks Wireless Processor Installation Guide (HQP7-RF-2)
Comprehensive installation instructions for the Lutron HomeWorks Wireless Processor (Model HQP7-RF-2). Covers product overview, components, tools required, step-by-step installation procedures for various mounting adapters (recess-mount, junction box, shelf-mount), system setup, LED diagnostics, and troubleshooting.
Preview Lutron Commercial Lighting Control System IT Implementation Guide
This IT Implementation Guide provides comprehensive information on setting up and managing Lutron's commercial lighting control systems, including Athena and myRoom XC. It covers networking, security, firewall/routing requirements, and configuration examples for seamless integration into IT infrastructures.
Preview Lutron Pico 4-Button Wireless Remote Control Guide
Comprehensive guide to the Lutron Pico 4-Button Wireless Remote, detailing its features, specifications, operation, and mounting options for various Lutron systems.
Preview Lutron Trademark Guidelines: Protecting Brand Identity and Usage
Comprehensive guidelines for the proper use of Lutron trademarks, logos, and trade dress to maintain brand integrity and legal compliance. Covers definitions, rules, and examples for effective brand representation.
Preview Lutron Pico Wireless Control: Specifications and Mounting Options
Comprehensive guide to the Lutron Pico Wireless Control, detailing its features, specifications, operation, model numbers, and various mounting solutions for smart home integration.
Preview Lutron QS Sensor Module (QSM) Installation Guide | Setup & Wiring
Detailed installation guide for the Lutron QS Sensor Module (QSM). Learn how to integrate wired and wireless sensors, including occupancy, daylight, and IR sensors, with Lutron lighting control systems. Covers setup, wiring, and troubleshooting for various QSM models.
Preview RadioRA 3 Wireless Setup Guide: Ensuring Reliable Lighting Control
A comprehensive guide to setting up Lutron's RadioRA 3 wireless lighting control system, detailing device types, design rules, and wireless communication requirements for optimal performance.