Wolf MWD24-2U/S Owner's Manual

This Owner's Manual is provided and hosted by Appliance Factory Parts.

Shop genuine replacement parts for Wolf MWD24-2U/S

Find Your Wolf Microwave Parts - Select From 13 Models

24" Drawer Microwave Oven

As true cooking instruments, Wolf microwave ovens have features that make fast meals better meals. With easy access to the food, drawer microwaves can be built in undercounter or in a wall application. They are designed to match the trim style of Wolf E series ovens and can be installed in a standard or flush inset application.

Features

Stainless steel finish.
Trim style matches Wolf unframed E series ovens.
Can be installed in a standard or flush inset application.
950 watts of power with one cu ft of interior drawer space.
Interior easily accommodates a 9" x 13" pan.
Easy-to-operate control panel has 11 programmable power levels.
Sensor cooking to monitor and adjust settings.
Micro warm allows you to keep food warm up to 30 minutes.
Interactive display - 99 minutes, 99 seconds.
Window in drawer allows you to view food as it cooks.
One-touch pads to open and close the drawer.
Control panel can be deactivated or locked.

Model: MWD24-2U/S

Trim Style: Unframed

This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.

Specifications

Overall Width	23 7/8"
Overall Height	15 1/4"
Overall Depth	23 3/8"
Oven Interior Capacity	1 cu ft
Oven Interior Dimensions	17 3/8" W x 5 7/8" H x 17 1/8" D
Minimum Cabinet Depth	Standard: 24", Flush Inset: 25"
Opening Width	22 1/8"
Min Flush Inset Width	24 3/8"
Opening Height	14 3/4"
Min Flush Inset Height	15 3/4"
Minimum Base Support	100 lbs
Power	950 W
Electrical Rating	1.5 kW
Electrical Requirements	120 V AC, 60 Hz, 15 amp circuit
Power Cord	4' cord with grounded plug
Shipping Weight	91 lbs

Installation Notes

Wolf drawer microwave ovens may be used in a standard installation, where the face trim overlaps stiles and rails, or in a flush inset installation with the front of the oven flush with surrounding cabinetry.

Complete installation specifications can be found on our website, wolfappliance.com.

Dimensions and Installation Diagrams

Overall Dimensions

The unit has the following overall dimensions:

Overall Width: 23 7/8 inches (606 mm)

Overall Height: 15 1/4 inches (387 mm)

Overall Depth: 21 9/16 inches (548 mm)

The power cord is located in a channel measuring 1 3/4 inches (44 mm).

Diagram shows a side profile with main dimensions labeled. Unit dimensions may vary by ±1/8 inch.

Installation Specifications

Standard Installation

For standard installation, the following clearances and dimensions are required:

Anti-tip block: 3 1/2" x 2" (89 mm x 51 mm)
Opening Height: 14 3/4 inches (375 mm)
Opening Depth: 23 1/2 inches (597 mm) minimum
Cabinet Depth: 24 inches (610 mm) minimum
Floor to Countertop: 36 inches (914 mm)

Diagrams show side view, front view, and top view with dimensions for standard installation, including opening height, depth, cabinet depth, and floor to countertop height.

Flush Inset Installation

For flush inset installation, the following clearances and dimensions are required:

Anti-tip block: 3 1/2" x 2" (89 mm x 51 mm)
Opening Height: 14 3/4 inches (375 mm)
Flush Inset Height: 15 3/4 inches (400 mm)
Cabinet Depth: 25 inches (635 mm) minimum
Floor to Countertop: 36 inches (914 mm)
Opening Width: 22 1/8 inches (562 mm)
Flush Inset Width: 24 3/8 inches (619 mm)
Flush Inset Depth: 1 1/4 inches (32 mm)

Diagrams show side view, front view, and top view for flush inset installation. Key dimensions include opening height, flush inset height, cabinet depth, floor to countertop height, opening width, flush inset width, and flush inset depth. Features like platform and side/top cleats are also indicated. Dimensions in parentheses are in millimeters unless otherwise specified.

	Wolf 30" E Series Transitional Drop-Down Door Microwave Oven (MDD30TE/S/TH) Specifications Detailed specifications, features, and installation guidelines for the Wolf 30" E Series Transitional Drop-Down Door Microwave Oven, model MDD30TE/S/TH. Includes dimensions, electrical requirements, and accessory information.
	Wolf Drawer Microwave MWD24-2 MWD30-2 Control Panel Parts Manual Detailed parts list and control panel view for Wolf Drawer Microwave models MWD24-2 and MWD30-2, including part numbers, descriptions, and a textual representation of the control panel diagram.
	Wolf MS24 24" Standard Microwave Oven \| Features & Specifications Explore the Wolf MS24 24-inch standard microwave oven. Discover its powerful features, dimensions, electrical specifications, and available trim options for seamless kitchen integration.
	Wolf 30" M Series Contemporary Drop-Down Door Microwave Oven (MDD3050CM/B/T) Explore the Wolf 30-inch M Series Contemporary Drop-Down Door Microwave Oven (MDD3050CM/B/T). This document details its advanced features, precise specifications, and installation dimensions, designed for seamless integration into modern kitchens.
	Wolf Microwave Drop-Down Door Series Technical Service Manual Technical service manual for the Wolf Microwave Drop-Down Door Series, providing information on features, installation, use and care, and microwave leakage testing. Includes model number key and product specifications.
	Wolf MWD24-2 & MWD30-2 Drawer Microwave Technical Service Manual Comprehensive technical service manual for Wolf MWD24-2 and MWD30-2 Drawer Microwaves, covering installation, operation, troubleshooting, and component repair.
	Wolf M Series Built-In Ovens Design Guide Explore the design and installation specifications for Wolf M Series built-in ovens, including single and double oven configurations in transitional, professional, and contemporary styles. This guide provides essential planning information, electrical requirements, and dimensional drawings for seamless integration into your kitchen.
	Wolf Drawer Microwave Component Removal Guide This document provides detailed instructions for the component removal and servicing of Wolf Drawer Microwave models MWD24-2 and MWD30-2. It includes safety warnings, procedures for accessing and removing various parts, and guidance on testing and reassembly.