Three-mode Connection Touchpad User Manual

Connection Modes

2.4G Connection

1. Insert the receiver into a device with a USB port. (Please ensure your computer device has an available USB port.)
[Diagram: USB receiver being plugged into a computer port]

2. Turn on the power switch. The green indicator light will illuminate. [Icon: Power switch ON, Green light ?]

3. Once the computer recognizes the device, you can use the Touchpad.

Bluetooth Connection (Windows)

1. Turn on the power switch. Short press the pairing button. The blue indicator light will turn on. Long press the Bluetooth pairing button for approximately 5 seconds until the indicator light flashes, entering pairing mode.
[Diagram: Touchpad showing power switch, pairing button, and indicator light]

2. Open 'Settings' on your Windows device and turn on Bluetooth. Click on 'Add Bluetooth or other device'.
[Image Description: Screenshots of Windows Bluetooth settings showing 'Add device' and selecting 'Bluetooth']

3. Select 'Bluetooth' from the list of devices to add and initiate the search.

4. Wait until '2.4G + BT5.2 Touch' is detected, then click on the pairing name to connect.

5. A successful connection prompt will appear, and you can now use your Touchpad.

Wired Connection

Turn on the power switch and short press to switch to wired mode. In wired mode, the blue indicator light will be on. Insert the USB-C cable, and the computer will recognize the device.
[Icon: Power switch ON, Blue light ?, USB-C port]

Note: When connected via USB-C, the Touchpad defaults to wired mode and is powered on. The physical power switch is inactive in this state.

Multi-Channel Connection

Connect the first device: Short press the 'connect' button to switch to 2.4G mode. Insert the USB adapter to establish the connection. (Re-pairing requires a long press of the 'connect' button for approximately 5 seconds until it flashes rapidly).

Connect the second device: Short press the 'connect' button to switch to Bluetooth mode. Then, long press the mode switch button for approximately 5 seconds to match the code. Search for the device via Bluetooth and complete the pairing.

Connect the third device: Short press 'connect' to switch to wired mode. Plug in the USB-C cable to establish the connection.

When multiple devices are connected simultaneously, short press the mode switch key to cycle through channels and freely switch between connected devices.

Gesture Controls

Apple System Gestures

• Open the program dock: Swipe the pointer lightly across the bottom of the screen with one finger.
• Go to the main screen: Swipe the pointer lightly across the bottom of the screen with one finger. After the program dock appears, swipe the pointer across the bottom of the screen again.
• Open control center: Move the pointer with one finger to select the status icon in the upper right corner, then click.
• Open the Notification Center: Move the pointer with one finger to select the status icon in the upper left corner, then click.
• Scroll up or down: Perform a two-finger swipe up or down.
• Zoom in/out: Place two fingers close together and expand to enlarge, or pinch together to shrink.
• Go to main screen: Perform a three-finger swipe up.
• Open the App Switcher: Perform a three-finger swipe up, pause briefly, then lift your finger.
• Switch between apps or desktops: Perform a three-finger swipe left or right.
• Open search: Perform a three-finger click. (Configurable)
• Open the 'Today' view: When the home screen or lock screen is visible, perform a two-finger swipe to the right.
• Open search from the home screen: Perform a two-finger swipe downwards.
• Auxiliary point press: Double-tap icons on the home screen, emails in the mailbox, or the 'Camera' button in the control center to display their quick operation menu.

Win10 & Win11 System Gestures

• Single finger click: Left click.
• Single finger double click: Drag again to select multiple options.
• Two finger click: Right click.
• Drag with two fingers: Scroll up or down. (The direction of the scroll wheel can be set).
• Two finger pinch gesture: Zoom in/out.
• Three-finger swipe up: Opens multitasking view. (Configurable for volume up/down).
• Three-finger swipe down: Displays the desktop. (Configurable for volume up/down).
• Three-finger click: Opens search. (Configurable).
• Three-finger swipe left/right: Switches between apps or desktops. (Configurable for previous/next track).
• Four-finger swipe up: Opens multitasking view.
• Four-finger swipe down: Displays the desktop. (Configurable for volume up/down).
• Four-finger swipe left/right: Switches between apps or desktops. (Configurable for previous/next track).
• Four-finger click: Opens the Notification Center.

Product Features

• In USB wired mode, it supports multi-finger touch technology for all Apple devices, consistent with the original controller board.
• In 2.4G wireless mode, it supports multi-finger touch technology for all Apple devices, consistent with the original controller board.
• Supports multi-finger touch technology for iPad devices in BLE Bluetooth mode.
• Under Win10 and Win11 systems, both wired and wireless modes support multi-finger touch PTP format.
• Left and right button vibration motor: Default motor vibration is off. Touch the switch area for 3 seconds to turn on motor vibration; the motor indicator light will illuminate. [Icon: Vibration motor switch]

Status Display

• Code matching: Turn on the power switch, the Bluetooth light will turn on. Press and hold the code matching button for approximately 5 seconds; the Bluetooth light will flash. [Icon: Pairing button, flashing light]
• Charging: The red indicator light illuminates when charging and turns off when fully charged. [Icon: Charging indicator ?]
• Low voltage prompt: When the voltage is below 3.3V, the red indicator light flashes. [Icon: Low battery warning ? flashing]

Technical Specifications

• Touchpad size: 160.7 x 120.7 x 10.34mm (thin area 5.47mm)
• Touchpad weight: 180g (including adapter)
• Product material: Aluminum alloy body
• Battery capacity: 500mAh
• Charging time: 2 hours
• Working voltage: 3.7V (Bluetooth/2.4G)
• Working voltage: 5V (wired mode)
• Working current (standby): 3-4mA
• Working current (touch line click): 12-15mA
• Working distance: 10 meters (wired 1.5 meters)
• Sleep current: 0.3-0.8mA
• Sleep time: 30 minutes
• Wake up time: 200ms (touch wake-up)
• Return/sampling rate: ≈125Hz
• Connection method: Bluetooth / 2.4G wireless / USB-C wired

Warranty Information

This section provides a template for warranty registration, including fields for company/personal name, address, phone number, postal code, product name and model, and purchase date. It also lists exclusions for warranty coverage, such as modifications, improper operation, use of non-provided consumables, or damage from external causes.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC ID: 2AFW2-T8100C