4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
Robustel Cloud Manager Service
Owner's Manual for robustel models including: R3010 Industrial Gateway for Elevators, R3010, Industrial Gateway for Elevators, Gateway for Elevators, Elevators
R3010 Industrial Gateway for Elevators | Robustel
Gateway industrial para ascensores R3010| Robustel
File Info : application/pdf, 2 Pages, 265.06KB
DocumentDocumentPPRROODDUUCCTTDDAATTAASSHHEEEETT R3010 Industrial Cellular IoT Gateway 2xEth + 1xVoice + 1xRS232 + 1xRS485 +1xCAN + 1xConsole + 1xUSB INTRODUCTION Robustel R3010 is an industrial gateway designed for elevator monitoring and provides fast, reliable and stable Internet connectivity. R3010 is a powerful gateway developed from RobustOS, a Robustel self-developed and Linux-based operating system which is designed to be used in Robustel hardware routers. The RobustOS includes basic networking features and protocols providing customers with a very good user experience. Meanwhile, Robustel offers a Software Development Kit (SDK) for partners and customers to allow additional customization by using C, C++. It also provides rich APPs to meet fragmented IoT market demands. RCMS is Robustel's free router monitoring service that is fully compatible with the R3010. It allows customer to see a location overview of their routers quickly and simply on a map. Features such as data usage, signal strength, current network and much more can then be viewed on a per router basis. Over-the-air updates are supported for Firmware, router configuration and Apps serving as essential `insurance' if anything was not quite right during deployment. You can try Robustel's free router management platform by signing up here: https://rcms-cloud.robustel.net KEY FEATURES Supports 2G/3G/4G cellular network Supports always online and connect according to needs Various interfaces: RS232/CAN/RS485/Console/USB/Ethernet/FXS RS485 serial port supports BACnet protocol Supports GSM and VoLTE (optional) for voice traffic Supports IPSec, OpenVPN, PPTP, L2TP, GRE, DMVPN Supports Modbus RTU/ASCII converts to TCP Built-in real time clock, software watchdog Supports message, telephone and reboot at regular time Supports e-mail and message event alert RobustOS + SDK + App Equipped with third party management platform, to realize real-time processing and analysis, fault real-time warning Management via SMS/Web/CLI/SNMP/RCMS Cloud Robust industrial design (9 ~ 26 VDC, desktop, wall or DIN rail mounting) APPLICATION EXAMPLES Phone IP Camera Controller Sensor FXS Ethernet RS232 CAN RS485 R3010 Base Station Housing Estate Control Center Third-party Platform Wireline Connection Wireless Connection SPECIFICATIONS Cellular Interface Number of antennas Type of ports SIM Standards Voice Interface Physical connector Type Interface standard Subscriber line interface circuit (SLIC) Ethernet Interface Number of ports Serial Interface Number of ports Connector Signal definition Others Expansion Console LED Indicators 2 (MAIN + AUX) SMA-K 1 Mini SIM (2FF) GSM/GPRS/EDGE/WCDMA/HSDPA/HS UPA/HSPA+/DC-HSPA+/TD-SCDMA/CD MA (CDMA 1X/EVDO)/FDD LTE/TDD LTE 3-pin 3.81 mm connector 1 x FXS ITU Q.512 (SLIC), ITU K.20 (overcurrent and overvoltage protection) Ring voltage: 40 ~ 90 Vpk configurable Ring frequency: 20 ~ 25 Hz Ring waveform: sinusoidal Maximum ringer load: 5 ringer equivalence numbers (RENs) On-hook voltage (tip/ring): -46 ~ -56 V Off-hook current : 18 ~ 20 mA Terminating impedance: configurable 2 x 10/100 Mbps (ETH0 + ETH1) 1 x RS232 + 1 x RS485 + 1 x CAN 3-pin 3.81 mm connector RS232: Tx, Rx, GND RS485: A (Data+), B (Data-), GND CAN: H, L, GND 1 x USB 2.0 host, up to 480 Mbps 1 x Console (GND, Tx, Rx) 1 x RUN, 1 x MODEM, 1 x USR, 3 x RSSI, 1 x PWR Software (Basic features of RobustOS) Network protocols PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, RIP, OSPF, NTP, SMTP, Telnet, VLAN, SSH2, IP Passthrough, etc. VPN tunnel IPSec, OpenVPN, GRE Firewall DMZ, anti-DDoS, Filtering (IP/Domain nadadmre/sMs),APCort Mapping, Access Control Remote management Web, CLI, SMS, RCMS Serial port Transparent, TCP Client/Server, UDP, Modbus RTU Gateway, BACnet App Center (Apps of RobustOS) Apps L2TP, PPTP, DMVPN, DDNS, RCMS VRRP, QoS, SNMP, Language *Request on demand, for more Apps please visit www.robustel.com. SDK Supported programming language C, C++ Flash available for SDK 64 MB RAM available for SDK 64 MB Power Supply and Consumption Power supply interface 2-pin 3.81 mm connector Input voltage 9 ~ 26 VDC Power consumption 900 mA (MAX) @ 9 V, 600 mA (MAX) @ 12 V, 400 mA (MAX) @ 26 V Physical Characteristics Ingress protection IP30 Housing & Weight Metal, 300g Dimensions 134 x 98 x 32 mm Installation Desktop, wall mounting and 35 mm DIN rail mounting Operation temperature -40 ~ +75°C Storage temperature -40 ~ +85°C Relative humidity 5 ~ 95% RH Regulatory and Type Approvals Environmental RoHS 2.0, WEEE ORDERING INFORMATION Model PN Frequency Bands* Country/Region 4G: LTE FDD: B1/B3/B5/B7/B8/B20 B040703 LTE TDD: B38/B40/B41 3G: WCDMA: B1/B5/B8 EMEA R3010-4L 2G: GSM: B3/B8 4G: LTE FDD: B1/B3/B8/B18/B19/B26 B040705 LTE TDD: B41 Japan 3G: WCDMA: B1/B6/B8/B19 * For more information about frequency bands in different countries, please contact your Robustel sales representative. Certification (*In progress) CE, UKCA Telec, JATE Email: info@robustel.com Website: www.robustel.com ©2022 Guangzhou Robustel Co., Ltd. All rights reserved. Subject to change without notice.