Instructions for MBJ Imaging models including: A6 Rails Clamp with Mounting, A6, Rails Clamp with Mounting, Clamp with Mounting, Mounting

A6 Manual Applikation Filterhalter

Montagehinweis

Breite Balkenbeleuchtung - MBJ Imaging

Breite Balkenbeleuchtung High Power- MBJ Imaging

Mounting of Filter Holder

LED Toplights - MBJ Imaging

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 1.87MB

Document Document

Filter holder
Mounting with clamp rails

Clamp rail

Cover plate

Optical foil Light

Clamp rail Screws (M2,5 x 4)

1. Protective Foils are marked with a sticker. Please handle foils and cover plates with care - avoid scratches and touching of the surface. We suggest to wear gloves.
2. Attach one clamp rail losely with screws.
3. Insert optical foil. (If more than 1 foil is used please refer to schematic overview to the right)
4. Insert cover plate.
5. Attach second clamp rail.
6. Hand-tighten screws, lightly pressing down the clamp rails onto the cover plate .

Cover plate
Polarizer Collimator
Diffusor
LED

Filter holder
Mounting with clamps

Clamp

Cover plate

Optical foil

Light

Clamp

Screws (M3 x 6)

Clamp

1. Protective Foils are marked with a sticker. Please handle foils and cover plates with care - avoid scratches and touching of the surface. We suggest to wear gloves.
2. Place filter on luminous area of the lighting. (if more than 1 foil is used please refer to schematic overview to the right)
3. Place cover plate on top.
4. Attach clamps with screws. The back of the lighting has small indentions indicating where the screws needs to be placed.
5. Thighten screws, hand tight only.

Cover plate
Polarizer Collimator
Diffusor
LED