QR Network Access - Cubetape
User Guide for Cubetape models including: C200 Communications Bluetooth Pairing, C200, Communications Bluetooth Pairing, Bluetooth Pairing, Pairing
Support - UPS Dimension & Weight Scanning Systems
File Info : application/pdf, 1 Pages, 249.98KB
DocumentDocumentC200 Communications Bluetooth Pairing Options When using Bluetooth there are four methods of pairing a C200 with a host system: · Manually using the Pair New Device dialogue on the host. · Using a 3rd Party Utility to scan a barcode containing the Bluetooth MAC address of the C200. This requires a 3rd party utility along with a pairing label fixed to the C200. · Scanning a C200 Scan to Pair QR code containing the MAC address of the host which initiates connection from the C200. · Reading the C200 NFC tag with an integrated reader to initiate connection using NFC. Host Utility and Label Format and content of the label depends on the third party utility, but the MAC address of a given C200 can be output by scanning the About MAC Address QR code. Scan to Pair QR Code The Scan to Pair QR code needs to contain the following data: ^%%##^CodeC0=MACADDRESS where MACADDRESS is the 12-digit mac address of the target host with all alpha characters capitalised. For example, a mobile device with BT MAC Address of b4:f1:dA:28:91:94 requires encoded data of: ^%%##^CodeC0=B4F1DA289194 There is a QR code generator at the Cubetape website which will produce pairing barcodes in the correct format: https://cubetape.com/qr-network-access When C200 scans the Scan to Pair QR code a pairing request is received at the host which requires user acceptance before the connection is completed. (User dialogue may vary on different platforms and versions - example is from Android 14). Selecting Pair completes the connection, C200 LED goes solid blue and data can be transferred to the host. NFC Tag C200 contains a static NFC tag adjacent to the scan engine. When the tag is brought close to an NFC Reader, a connection sequence starts and completes after User acceptance. (User dialogue may vary on different platforms and versions example is from Android 14). Selecting Yes followed by Pair completes the connection, C200 LED goes solid blue and data can be transferred to the host. NFC Tag | C200 Communications Bluetooth Pairing Options - February 2024 © 2024 ParcelTools Pty Ltd www.cubetape.com