SANGEAN PR-D17 Portable Radio

Important Safety Instructions

Please read and understand all safety and operating instructions before using the radio. Retain these instructions for future reference. Heed all warnings on the appliance and in the operating instructions. Follow all operations and use instructions.

• Water and Moisture: Do not use the appliance near water (e.g., bathtub, washbowl, laundry tub, kitchen sink, wet basement, swimming pool).
• Cleaning: Unplug the radio from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior.
• Placement: Do not place the radio on an unstable cart, stand, bracket, or table, as it may fall and cause injury or damage. Ensure proper ventilation; do not block openings with soft surfaces or place in built-in situations that reduce airflow.
• Power Sources: Operate only from the type of power source indicated on the marking label. Consult your dealer or power company if unsure.
• Power Cords: Position cords to avoid being walked on, pinched, or having items placed on them. Grip the plug, not the cord, when unplugging. Do not overload wall outlets or extension cords, as this can cause fire or electric shock. Never insert objects into the radio through openings, as they may touch dangerous voltage points or cause short circuits.
• Unattended Use: If the radio is left unattended for long periods, unplug it from the wall outlet to prevent damage from lightning or power surges. Remove batteries if left unused for an extended period to prevent leakage and damage.
• Servicing: Do not attempt to service the unit yourself. Removing covers may expose you to dangerous voltage and will void the warranty. Refer all servicing to qualified service personnel.
• Object and Liquid Entry: Never push objects of any kind into the radio through openings. Never spill liquid of any kind on the product.
• Servicing Conditions: The appliance should be serviced by qualified personnel when the power cord or plug is damaged, objects have fallen or liquid has spilled into the radio, the radio has been exposed to rain or water, it does not operate normally, or the enclosure is damaged.
• Battery Safety: Batteries (battery pack or installed batteries) shall not be exposed to excessive heat such as direct sunlight, fire, or the like. Dispose of batteries responsibly at a recycling center; do not incinerate. Keep batteries away from young children as they can be a choking hazard.
• AC Adapter Interference: If experiencing AM band interference from the adapter, move the radio at least 30cm away from the AC power adapter. Use only the provided AC adapter.

Controls

The radio features large, high-contrast yellow controls and raised symbols on preset buttons for easy identification, along with large rotary tuning and volume control knobs.

• 1 Speaker: Outputs audio.
• 2 Low battery indicator: Alerts when batteries need replacement (red).
• 3 LCD display: Shows frequency, time, station name, and status icons.
• 4 Power button: Turns the radio on/off.
• 5 Preset buttons: Store and recall favorite stations (5 for FM, 5 for AM).
• 6 Handle: For portability.
• 7 Tuning / Time setting knob / Seek button: Used for tuning frequencies, setting clock time, and seeking stations.
• 8 Volume knob: Adjusts the audio volume.
• 9 CT (Clock Time) / Display button: Used for RDS Clock Time synchronization and toggling display information (time/frequency).
• 10 Sleep button: Sets the automatic turn-off timer.
• 11 Alarm button: Sets and controls the radio alarm.
• 12 Menu button: Accesses settings like voice language, volume, time format, AM tuning step, and software/voice version.
• 13 Band button: Selects between FM and AM bands, and AUX input.
• 14 Telescopic antenna: For FM reception.
• 15 FM Stereo / Mono switch: Adjusts FM reception mode to reduce hiss on weak signals.
• 16 AUX IN socket: 3.5mm socket for connecting external audio sources.
• 17 Headphone socket: 3.5mm socket for private listening.
• 18 DC IN socket: For connecting the AC power adapter.
• 19 Battery compartment: Holds 6 x UM-2 (C size) batteries.

LCD Display Icons

• A Battery power: Indicates battery status.
• B Stereo display: Shows when receiving an FM stereo signal.
• C RDS display: Indicates when RDS service is available.
• D Sleep display: Shows when the sleep timer is active.
• E Time set: Indicates clock setting mode.
• F Alarm display: Shows when an alarm is set.
• G Frequency / Time display: Shows the current radio frequency or set time.

Features

This radio features helpful voice prompts in multiple languages for vision-impaired users.

Battery Operation

Insert 6 x UM-2 (C size) batteries, ensuring correct polarity. Replace batteries when power is reduced, distortion occurs, or the low battery indicator is red. Remove batteries if the radio will not be used for an extended period.

Using the AC Power Adaptor

Connect the included 9V DC, 1.2A AC adapter to the DC IN socket and a standard AC outlet. Batteries are automatically disconnected when the adapter is used. Disconnect the adapter from the main supply when not in use.

Setting Clock Time

Upon initial use, select the voice language. To set the clock, press and hold the Time setting knob for over 2 seconds. The hour digits will flash. Rotate the knob to set the hour, press to confirm, then set the minute digits and press to finish.

Menu Setting

Access the menu by pressing the Menu button. Options include:

• Voice language: Select desired language.
• Voice volume: Adjust the volume of voice prompts.
• Time format: Choose between 12-hour or 24-hour format.
• AM tuning step: Select 10kHz (for America) or 9kHz (for other countries).
• Software / Voice version: View current versions.

Tuning the Radio (FM / AM)

Press the Power button to turn on. Use the Band button to select FM, AM, or AUX. For FM, extend and rotate the telescopic antenna for best reception. For AM, rotate the radio for best signal. Rotate the Tuning knob to the desired frequency or press the Seek button to automatically find the next available station.

Storing and Recalling Station Presets (FM / AM)

Tune to a desired station. Press and hold a Preset button (1-5) for over 2 seconds to store it. The preset number will appear on the display. To recall a preset, press the corresponding Preset button momentarily.

RDS Function

When an FM station provides RDS service, the RDS icon will appear, showing the station name and radio text if available. Use the CT button to synchronize the clock time with RDS CT service.

AUX IN

Press the Band button until "AUX IN" is displayed. Connect an audio source (e.g., iPod, MP3 player, CD player) using a 3.5mm connector to the AUX IN socket. Adjust volume on both the source device and the radio.

Setting Radio Alarm Time

Ensure the clock is set correctly. Press the Alarm button. Rotate the Tuning knob to select "ALARM OFF" or "ALARM ON". If "ALARM ON", press the Tuning knob to set the alarm time (hours then minutes). The radio will play the last tuned station at the alarm time. If in AUX mode, a buzzer alarm will sound, starting softly and gradually increasing (Humane Wake System).

Sleep Function

Press the Sleep button. Rotate the Tuning knob to select the desired sleep time (60-45-30-15-120-90 minutes). Press the Tuning knob to confirm. The radio will automatically turn off after the set time. To cancel, press the Power button.

FM Stereo / Mono Selection

Use the switch on the side of the radio. Slide to "Mono" mode to reduce hiss on weak FM signals.

Headphone Socket

A 3.5mm headphone socket is provided. Inserting headphones automatically mutes the internal speaker. Be aware of headphone sensitivity and set volume to a low level before connecting to prevent hearing damage.

Factory Reset

If the radio malfunctions or settings are corrupted, press and hold the Power button and Preset 5 button simultaneously until "DEFAULT" appears and all icons flash on the screen. This will erase all user settings.

Specifications

• Power Requirements: AC Power adaptor DC 9V 1.2A (center pin positive), 6 x UM-2 (C size) batteries.
• Battery Life: Approx. 70 hours (4 hours/day at normal volume with alkaline batteries).
• Frequency Coverage: FM 87.5-108 MHz, AM 522-1710 kHz (9kHz/10kHz step).
• Circuit Features: Loudspeaker 2.5 inches 8ohm, Output Power 800+800 mW, Headphone socket 3.5mm diameter.
• Antenna System: FM telescopic antenna, AM built-in ferrite antenna.
• Operating temperature range: 0°C to +35°C.
• Power Consumption: Standby < 0.8W. AUX mode (idle, no signal): 0.8W after 15 minutes.

Product Information

The barcode label includes Serial number, Production month, Production year, and Product code.

SANGEAN reserves the right to amend specifications without notice.

Disposal: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive).