GooDisplay Image2LCD Software User Guide

User Guide for GooDisplay models including: Image2LCD Software, Software

File Info : application/pdf, 12 Pages, 1,005.95KB

Image2LCD Software Bitmap Conversion Instructions V1.1

Dalian Good Display Co., Ltd.

Image2LCD

1. ePaper Image Creation

Monochrome ePaper image, including black and white

;

Three-color ePaper image, including black, white, and red or yellow

( );

Four-color ePaper image, including black, white, red, and yellow

;

Six-color ePaper image, including black, white, red, yellow, blue, and green

; Seven-color ePaper image, including black, white, red, yellow, blue, green, and

orange.

Windows Color Table

When creating ePaper images, you can refer to the color table provided by the Paint

software that comes with the Windows system. You need to create an image with the

same resolution as the ePaper and save the image in bmp or jpg format.

Note: Before the picture production and bitmap conversion for a three-color ePaper image, it needs to be split into two separate images: black-and-white and red-and-white, as shown in the image below:

2. An Introduction to ePaper Bitmap Conversion Software
ePaper bitmap conversion can be done using the Image2LCD software. Download the software from the following link:
(https://v4.cecdn.yun300.cn/100001_1909185148/image2lcd.zip). After downloading and extracting the software, you will see three files. The file with the .exe format is the installation file, and the file with the .htm format contains the registration code. Double-click the .exe file to install the software. After the software is installed, click the "Register" button in the software and enter the registration code: 0000 -0000-0000-0000-6A3B to complete the software registration.

www.good-display.com

Image2LCD

Figure 1: Software Interface Image Import Button
Import the prepared image into the software. Image Display Interface
Preview of imported images. Image Preprocessing Interface
Preview of image processing. Image Information Panel
Displays information such as resolution and name of the imported image. Output Data Type
Data type output after image processing. Scan Mode
Direction of image processing scanning, typically including horizontal and vertical scanning.
Output Gray Scale
Image grayscale includes four modes: monochrome, 4-gray, 16-gray, and 256-color grayscale. For black and white images, choose monochrome; for black and white with red and yellow, choose 4-gray; for seven-color images, choose 256-color.
Maximum Width and Height
Set the image resolution, typically matching the screen resolution. After entering the

resolution parameters, click " " to complete the setting. Scan Mirror Processing

: These two options are not selected by default.

: Left-right mirror.

: Up-down mirror.

: Byte data mirror.

www.good-display.com

Image2LCD

Color Inversion

Data Save

: Color inversion.

: Save image data, default save location is the C drive.

3. ePaper List
Note: Click on an ePaper model to jump to the corresponding bitmap conversion operation.
1) Monochrome EPD 0.97 inchGDEM0097T61GDEW0097T50 1.02 inchGDEW0102T4 GDEW0102I4FC 1.22 inchGDEM0122T61 1.54 inchGDEY0154D67GDEY0154D67WTGDEM0154I61GDEY0154D90LT GDEW0154T8DGDEW0154I9FC 2.13 inchGDEY0213B74GDEY0213B75GDEY0213D32LTGDEM0213I61
GDEW0213I5FD 2.15 inchGDEW0215T11 2.66 inchGDEY0266T90GDEY0266T90HGDEY0266D91LT 2.7 inchGDEY027T91GDEW027W3 2.9 inchGDEY029T94GDEY029T71HGDEY029D57LTGDEW029I6FD 3.1 inchGDEQ031T10 3.7 inchGDEY037T03 4.2 inchGDEY042T81GDEM042T31GDEM042I31GDEW042T2 4.26 inchGDEQ0426T82 5.79 inchGDEY0579T93 5.83 inchGDEY0583T81
7.5 inch: GDEY075T7 10.2 inchGDEM102T91 11.6 inchGDEY116T91 13.3 inchGDEM133T91
2) Three-Color ePaper 0.97 inchGDEM0097Z61 1.54 inchGDEM0154Z90 2.13 inchGDEY0213Z98 2.66 inchGDEY0266Z90 2.7 inch GDEM027Z71GDEW027C44 2.9 inchGDEY029Z95 3.7 inchGDEY037Z03 4.2 inchGDEY042Z98 5.79 inchGDEY0579Z93 5.83 inchGDEY0583Z31
7.5 inch: GDEY075Z08 10.2 inchGDEM102Z91 11.6 inchGDEY116Z91 13.3 inchGDEM133Z91
3) Four-Color ePaper 0.97 inchGDEM0097F51 1.54 inchGDEY0154F51GDEM00154F51H

www.good-display.com

Image2LCD

2.13 inchGDEY0213F51GDEY0213F52 2.66 inchGDEY0266F51GDEY0266F51HGDEM0266F51H 2.9 inchGDEY029F51GDEY029F51H 3.5 inchGDEM035F51 3.7 inchGDEM037F51GDEM037F52 4.2 inchGDEM042F51GDEM042F52 5.79 inchGDEY0579F51 7.5 inchGDEM075F52 10.2 inchGDEM102F91 4) Six-Color ePaper 4 inchGDEP040E01 7.3 inchGDEP073E01 5) Seven-Color ePaper 5.65 inchGDEP0565D90 7.3 inchGDEY073D46
4. Steps for Bitmap Conversion of ePaper Images
4.1 Importing Images for ePaper Bitmap Conversion

Open the Image2LCD software, click the " " button, and import the image that needs bitmap conversion. The status information panel will then display the resolution and name of the imported image.
4.2 ePaper Bitmap Conversion Settings Ultra Chip series IC models (referred to as UC): UC8151D, UC8253, UC8276, UC8179, etc. Solomon series IC models (referred to as SSD): SSD1680, SSD1681, SSD1677, SSD1683, etc. Note: The width and height of the image should match those of the ePaper display.
After setting the resolution, click " " to confirm. 4.2.1 Bitmap Conversion for UC Series Monochrome and Tricolor ePaper 1) For monochrome and tricolor ePaper displays below 2.9 inch, you need to select
"Vertical Scan," "Monochrome," "Scan Right to Left," and "Reverse color." Set the
resolution corresponding to the ePaper display, then click " " to confirm the settings.

Finally, click "

" to convert the image to an array and save it with the extension ".C".

0.97 inch184x88

1.02 inch128x80

1.54 inch152x152

2.13 inch212x104

2.15 inch208x112

2.66 inch296x152

2.7 inch264x176

2.9 inch296x128

www.good-display.com

Image2LCD

2For 3.1 inch and 3.7 inch monochrome and tricolor ePaper displays, select "Vertical Scan," "Monochrome," and "Reverse color." Set the resolution corresponding

to the ePaper display, then click " " to confirm the settings. Finally, click "

" to

convert the image to an array and save it with the extension ".C".

3.1 inch320x240

3.7 inch416x240

3For 5.83 inch monochrome and tricolor ePaper displays, select "Horizontal Scan" and "Monochrome." Set the resolution corresponding to the ePaper display, then click

" " to confirm the settings. Finally, click "
save it with the extension ".C". 5.83 inch648 x480

" to convert the image to an array and

www.good-display.com

Image2LCD

4For 4.2 inch and 7.5 inch monochrome and tricolor ePaper displays, select "Horizontal Scan," "Monochrome," and "Reverse color." Set the resolution corresponding to

the ePaper display, then click " " to confirm the settings. Finally, click "
the image to an array and save it with the extension ".c". 4.2 inch400x300 7.5 inch800x480

" to convert

4.2.2 Bitmap Conversion for SSD Series Monochrome and Tri-color ePaper 1For monochrome and tricolor ePaper displays below 2.9 inches, select "Vertical
Scan," "Monochrome," and "Reverse color." Set the resolution corresponding to the ePaper display, then click "A" to confirm the settings. Finally, click "B" to convert the image to an
array and save it with the extension ".C". 0.97 inch184x88 1.22 inch176x192 1.54 inch low resolution152x1521.54 inch high resolution200x200 2.13 inch low resolution212x1042.13 inch high resolution250x122 2.66 inch low resolution296x1522.66 inch high resolution360x184 2.7 inch264x176

www.good-display.com

Image2LCD 2.9 inch low resolution296x1282.9 inch high resolution384x168

2For monochrome and tricolor ePaper displays above 4.2 inch (excluding 4.26 inch and 5.79 inch), select "Horizontal Scan," "Monochrome," "Scan Bottom to Top," and

"Reverse color." Set the resolution corresponding to the ePaper display, then click " " to

confirm the settings. Finally, click "
with the extension ".C". 4.2 inch400x300 10.2 inch960x640 11.6 inch960x640 13.3 inch960x680

" to convert the image to an array and save it

Note 1: After entering the image resolution parameters, click " " to confirm the settings.
Note 2: For tri-color ePaper with black, white, and red, one image needs to be split into two images: black-and-white and red-and-white. Perform the same bitmap conversion operation on both images.
3 For 4.26 inch monochrome ePaper displays, select "Horizontal Scan,"
"Monochrome," "Scan Right to Left," and "Reverse color." Set the resolution corresponding

to the ePaper display, then click " " to confirm the settings. Finally, click "

" to

convert the image to an array and save it with the extension ".C".

4.26 inch800x480

www.good-display.com

Image2LCD

Note: After entering the image resolution parameters, click " settings.

" to confirm the

4For 5.79 inch monochrome and tricolor ePaper displays, select "Horizontal Scan," "Monochrome," "Scan Right to Left," and "Scan Bottom to Top." Set the resolution
corresponding to the ePaper display, then click " " to confirm the settings. Finally, click

" to convert the image to an array and save it with the extension ".C".

5.79 inch800x272

4.2.3 Four-Color ePaper Bitmap Conversion 1For four-color ePaper displays below 3.7 inch, select "Vertical Scan," "4 Color," and
"Scan Right to Left." Set the resolution corresponding to the ePaper display, then click

" " to confirm the settings. Finally, click "

" to convert the image to an array and

save it with the extension ".C".

0.97 inch184x88

1.54 inch low resolution152x1521.54 inch high resolution200x200

2.13 inch250x122Make the image 250x128

2.66 inch low resolution296x1522.66 inch high resolution360x184

2.9 inch low resolution296x1282.9 inch high resolution384x168

3.5 inch384x184

3.7 inch416x240

www.good-display.com

Image2LCD

Note: After entering the image resolution parameters, click " settings.

" to confirm the

2For four-color ePaper displays above 4.2 inch, select "Horizontal Scan," "4 Color," and "Scan Right to Left." Set the resolution corresponding to the ePaper display, then click

" " to confirm the settings. Finally, click " save it with the extension ".C".
4.2 inch400x300 5.83 inch648x480 7.5 inch800x480 10.2 inch960x640 13.3 inch960x680

" to convert the image to an array and

Note: After entering the image resolution parameters, click " " to confirm the settings.
3For 5.79 inch four-color ePaper display, select "Horizontal Scan," "4 Color," "Scan
Right to Left," and "Scan Bottom to Top." Set the resolution corresponding to the ePaper

display, then click " " to confirm the settings. Finally, click "
to an array and save it with the extension ".C". 5.79 inch792x272

" to convert the image

www.good-display.com

Image2LCD

Note: After entering the image resolution parameters, click " " to confirm the settings.
4.2.4 Six-Color ePaper Bitmap Conversion For six-color ePaper displays, select "Horizontal Scan" and "256 Color." Set the
resolution corresponding to the ePaper display, then click " " to confirm the settings.

Finally, click "

" to convert the image to an array and save it with the extension ".C".

4 inch600x400

7.3 inch800x480

Note: After entering the image resolution parameters, click " settings.

" to confirm the

4.2.5 Seven-Color ePaper Bitmap Conversion For seven-color ePaper displays, select "Horizontal Scan" and "256 Color." Set the
resolution corresponding to the ePaper display, then click " " to confirm the settings.

Finally, click "

" to convert the image to an array and save it with the extension ".C".

5.65 inch600x448

7.3 inch800x480

Note: After entering the image resolution parameters, click " settings.

" to confirm the

4.3 Array Replacement in Driver Program Replace the arrays from the ".C " file into the corresponding arrays in the "Ap_29demo.h" file in the driver program. Ensure that the array names match those in the main function. Recompile the program and download it to the microcontroller.

www.good-display.com

Image2LCD

www.good-display.com

References

WPS 文字