Radiomaster Nomad Gemini Xrossband ExpressLRS Module
Features
The Radiomaster Nomad is a powerful dual-band 1W Gemini Xrossband ExpressLRS transceiver module designed for RC transmitters.
- Experience unmatched reliability with dual-band ELRS Gemini Xrossband technology.
- Supports ELRS Gemini 2.4GHz.
- Supports ELRS Gemini 868/900MHz.
- Features a powerful cooling system with dual 1-watt transceivers, ensuring optimal performance even during extended use.
Specifications
Item: Nomad Dual Band Module with Micro Adapter
Regulatory Domain: ISM 2.4GHz, FCC915MHz
MCU: ESP32 (main), ESP32c3 (aux, as ESP backpack)
RF chip: Semtech LR1121 x 2
RF: Dual 1000mW | Dual band Gemini ELRS
Frequency Range: 2400 MHz - 2479 MHz / 903MHz - 927MHz
Maximum packet rate: 500Hz (1000Hz expected in ExpressLRS V3.4)
Minimum receiver refresh rate: 50Hz
RF Output Power: 1000mW x 2
Module bay adapters: Micro standard 5pin socket & Nano standard 8pin socket
Wifi Support: Yes
Bluetooth support: Yes
Built-in: RGB light strip
XT30 Power supply voltage: DC 6V - 16.8V
Weight: 87.20g (with antenna) / 71.10g (without antenna)
Dimension: 80*45*40mm (without antenna)
How to Bind
The NOMAD module requires ELRS V3.0.0 or later. Ensure your receiver is also using V3.0.0 or later.
Bind by Radio LUA
- Enter the radio's ELRS LUA script.
- Re-power your ELRS RX three times, ensuring it is in bind mode (LED will double blink).
- Press "Bind" within the LUA menu.
Bind with Bindphrase
For detailed instructions on binding with Bindphrase, visit: https://www.expresslrs.org/3.0/quick-start/binding/
Diagram Descriptions
Product Module: The main product is a compact, rectangular electronic module designed for RC transmitters. It features antenna connectors and interfaces for connecting to the radio's module bay.
Binding Setup Diagram: A diagram illustrates the binding process, showing the main NOMAD module, a smaller "Micro Adapter," and a "Nano Adapter." The diagram also indicates the use of 3-M2*5 screws for secure mounting.
Package Contents: The package includes the Nomad Dual 1-watt Gemini Xrossband ExpressLRS Module, two dual-band antennas (2.4GHz / 915 MHz), a Nano Adapter, and a manual card.