ZTE Blade A71 Smartphone
User Manual and Quick Start Guide
Model: ZTE Blade A71 (ZTE A7030RU)
Copyright © 2021 ZTE Corporation. All rights reserved.
Introduction
This document provides essential information for operating your ZTE Blade A71 smartphone. It covers device features, setup, safety guidelines, and troubleshooting.
The ZTE Blade A71 is a versatile smartphone running on the Android operating system, offering support for GSM, UMTS, Wi-Fi, and Bluetooth connectivity.
Trademarks: ZTE, Android, Google, Bluetooth SIG, Inc., microSDXC, SD-3C, LLC.
Document Version: R1.0, Date: 01.2021.
Device Overview
Device Layout:
- 1. 3.5mm Headphone Jack
- 2. Earpiece
- 3. SIM/microSD Card Tray
- 4. Microphone
- 5. USB Type-C Port
- 6. Speaker
- 7. Power Button
- 8. Volume Buttons
- 9. Rear Camera
- 10. Flash
- 11. Fingerprint Sensor
- 12. Front Camera
- 13. Proximity Sensor
- 14. NFC Sensor (optional)
[Diagram Description: A visual representation of the ZTE Blade A71 showing the location of all external buttons, ports, and sensors.]
SIM Card Installation and Usage
The device supports dual nano-SIM cards (4FF) and a microSDXC card.
Installation Steps:
- Locate the SIM card tray on the side of the device.
- Use a SIM ejector tool or a small paperclip to gently push the pinhole on the tray.
- Pull out the tray.
- Place nano-SIM cards and/or the microSDXC card into the designated slots on the tray. Ensure correct orientation.
- Carefully reinsert the tray into the device.
SIM Card Usage:
- SIM 1 and SIM 2 slots support 4FF (nano-SIM) cards.
- You can use one or two SIM cards, or one SIM card and one microSDXC card.
- Ensure SIM cards are properly seated for optimal performance.
Powering On/Off and Charging
To Power On: Press and hold the Power button until the ZTE logo appears.
To Power Off: Press and hold the Power button, then tap 'Power off' on the screen.
Charging: Connect the USB Type-C cable to the device and the power adapter. Plug the adapter into a power outlet. The battery icon on the screen indicates charging status. Use only ZTE-approved chargers and cables.
Basic Operations
Touchscreen Gestures:
- Tap: Lightly touch an item to select or open it.
- Long Press: Touch and hold an item to reveal more options.
- Drag: Touch and hold an item, then move your finger across the screen.
- Swipe: Slide your finger across the screen to scroll or navigate.
Settings and Connectivity
Access the Settings menu to configure your device.
Wi-Fi: Navigate to Settings > Network & Internet > Wi-Fi to connect to wireless networks.
Bluetooth: Go to Settings > Connected devices > Bluetooth to pair with Bluetooth devices.
Mobile Network: Configure mobile data, APNs, and preferred network types under Settings > Network & Internet > Mobile network.
Technical Specifications
| Feature | Specification |
|---|---|
| Model | ZTE Blade A71 (ZTE A7030RU) |
| Operating System | Android 11 |
| Processor | SC9863A |
| Network Bands | GSM: 850/900/1800/1900 MHz, UMTS: B1/B5/B8, FDD-LTE: B1/3/5/7/8/20/B28AB, TD-LTE: B38/B40/B41(120M) |
| SIM Card | Dual nano-SIM (4FF) or nano-SIM + microSDXC |
| Display | 6.52-inch IPS, 1600x720 pixels |
| Rear Camera | 16MP (main) + 8MP (wide) + 2MP (depth) |
| Front Camera | 8MP |
| Storage | 64GB eMMC |
| RAM | 3GB LPDDR4 |
| Bluetooth | IEEE 802.15.1 v 4.2 |
| Wi-Fi | IEEE 802.11 b/g/n |
| Expandable Storage | microSDXC up to 512GB |
| Dimensions | 165.2 x 75.2 x 8.2 mm |
| Weight | ~180g |
| Battery | 5000 mAh |
| Charging | 10W (5V/2A) |
| Sensors | GPS, NFC (optional), Fingerprint Sensor, Proximity Sensor |
Battery Information
The device is equipped with a 5000 mAh battery. For optimal battery life, follow standard charging practices.
[Battery Model: Li3839T44P8h866445]
Operating and Storage Conditions
Operating Environment:
- Temperature: 0°C to 35°C
- Humidity: 20% to 90% RH (non-condensing)
Storage Conditions:
- Temperature: -20°C to 45°C
- Humidity: 20% to 90% RH (non-condensing)
Safety and Compliance
General Safety:
- Handle the device with care to avoid damage.
- Avoid exposing the device to extreme temperatures, moisture, or direct sunlight.
- Use only approved accessories.
Radio Frequency (RF) Exposure:
This device complies with government requirements for exposure to radio waves. The Specific Absorption Rate (SAR) limits are set to protect public health. The device's SAR values are within the regulated limits.
[SAR Head: 0.139 W/kg, SAR Body: 1.18 W/kg]
To maintain compliance with RF exposure guidelines, keep the device at least 5 mm away from your body during operation.
Disposal: This device complies with Directive 2012/19/EU (WEEE). Do not dispose of the device in household waste. Contact local authorities for proper recycling and disposal procedures.
Troubleshooting and FAQ
Common Issues:
- Device not turning on: Ensure the battery is charged. Connect the charger and try again.
- Device is frozen or unresponsive: Press and hold the Power button for about 10 seconds to force a restart.
- Cannot connect to Wi-Fi/Bluetooth: Check that Wi-Fi/Bluetooth is enabled in settings. Restart the device and your router/accessory.
- SIM card not recognized: Ensure the SIM card is correctly inserted. Try reinserting it or testing it in another device.
Frequently Asked Questions:
- How to enter Recovery Mode? Power off the device. Then, press and hold the Volume Up button and the Power button simultaneously until the ZTE logo appears.
- How to perform a factory reset? Navigate to Settings > System > Reset options > Erase all data (factory reset). Note: This will erase all personal data from the device.
Service and Support
For detailed support, warranty information, and a comprehensive list of service centers, please visit the official ZTE support website:
The document also lists various authorized service points with contact numbers and operating hours across different regions.
