Genaray Mochi On-Camera Mini RGB Light
User Manual
Introduction
Thank you for choosing Genaray. The Mochi is a compact and fun on-camera mini RGB LED light that can be attached to your camera to add advanced lighting effects to any project. Its simple interface allows you to select operating modes and control color temperature, RGB, and brightness settings. You can also utilize twenty-one lighting effects to add realism and drama to your video. The built-in rechargeable Li-ion battery provides approximately an hour and a half of run time at full power.
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Keep this product away from water and flammable gases or liquids.
- Use only the correct, recommended voltage.
- Do not attempt to disassemble or repair this product.
- Clean this product with only a soft, dry cloth.
- All images are for illustrative purposes only.
Overview
The Mochi features an LCD screen, a mode selector, a value dial, an adjustment selector/effect selector, and a USB-C charging port. It also has 1/4-20 mounting sockets.
Instructions
Mounting the Light
Mounting to a Tripod or Light Stand
Screw the Mochi onto a light stand's 1/4-20 stud and tighten until secure.
Mounting to a Camera
- Screw the two washers onto the 1/4-20 stud so the flat surfaces face away from each other.
- Slide the mounting foot completely into the camera's mounting shoe. Tighten the bottom washer until it's snug against the camera.
- Screw the Mochi onto the 1/4-20 stud. Then tighten the top washer until it's snug against the light.
Magnetic Mounting
Use the built-in lightweight magnets to attach the light to a metal surface. This feature is best for mounting the light under a shelf or desk.
Charging the Mochi
Plug the USB-C connector into the Mochi and the USB-A connector into a powered USB port. When powered on, the battery indicator will show the battery's power level.
User Interface
On-Off / Mode Selector
Turn the mode selector to turn the light on and choose one of the operating modes: CCT, HSI, and EFF.
Value Dial
In all operating modes, turn the value dial to change the selected onscreen parameter.
Adjustment Selector
Press the adjustment selector to cycle through the adjustable parameters in each operating mode.
CCT Mode
CCT: Adjusts the color temperature from 2500 to 9900 K.
Brightness: Adjusts the brightness from 1% to 100%.
HSI Mode
Hue: Adjusts the hue from 0° to 360° of the color wheel.
Saturation: Controls the saturation of the hue from 0% to 100%.
Brightness: Adjusts the brightness from 1% to 100%.
EFF Mode
Turn the selector to EFF mode. Press the effects selector button to cycle through the effects.
Brightness: Adjusts the brightness from 1% to 100%.
Effects List:
- Flash: Simulates multiple camera flashes with short bursts of white light.
- Fast: Similar to Flash, with short and rapid bursts of white light.
- TV Screen: Simulates the constant glow from a television.
- Candle: Simulates the warm light of a flickering candle with a constant color temperature and brief changes in brightness.
- Flame 1: Simulates the dim light of a campfire or fireplace with a constant color temperature and brief changes to brightness.
- Flame 2: Similar to Flame 1, with more rapid changes in brightness.
- Police: Simulates the flashing lights of an emergency vehicle with alternating red and blue strobing.
- Ambulance: Simulates the flashing blue light of an ambulance.
- Fire Truck: Simulates the flashing red light of a fire truck.
- Strobe 1: A constant white strobe light.
- Strobe 2: Similar to Strobe 1, with more rapid strobing.
- Strobe 3: More rapid strobing than Strobe 2.
- Chase Slow: Scrolls through the entire color wheel from 0% to 360% on a continuous loop.
- Chase Mid: Similar to Chase Slow, with a more rapid loop through the color wheel.
- Chase Fast: Similar to Chase Mid, with a more rapid loop through the color wheel.
- Firework 1: Simulates the light from a fireworks display with blue, red, and orange bursts with a fade.
- Firework 2: Similar to Firework 1 with blue, red, green, and orange bursts with more rapid color changes and fade.
- Firework 3: Simulates fireworks with alternating flashing red light and solid white light.
- Club 1: Simulates rapidly strobing disco lights of different colors.
- Club 2: Simulates disco lights with alternating colors.
- Romantic: Slowly pulsating magenta light.
Specifications
Light Fixture
- Beam Angle: 120°
- Color Temperature: 2500 to 9900 K
- Color Accuracy Standard: CRI: >95, TLCI: 99
- Cooling System: Passive
- Dimming: Yes, 1% to 100%
- Display: LCD
- Housing Material: ABS plastic
Light Intensity @ 3 ft.
135 lx
Number of LEDs
60 (40 A/W, 20 RGB)
Expected Lamp Life
50,000 hr.
Dimensions (H×W×D)
3 × 2.8 × 1.2 in. (7.6 × 7 × 3.3 cm)
Weight
4 oz. (113 g)
Connectors
- Power Input Connector: USB Type-C
Mounting
- Fixture Mount: 1/4-20 (x2)
- Removable shoe mount
Power
- DC Input Power: 5 V/2 A
- DC Output: 3.7V, 2000 mAh
- Power Source: Internal battery (Rechargeable Li-ion)
- Max Power Consumption: 6 W
- Battery Life: 1.4 hr. (@9000 K, 100%)
- Battery Charge Time: 2.2 hr.
One-Year Limited Warranty
This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Genaray's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Genaray's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Genaray along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at info@genaray.com.
© 2023 Genaray. All Rights Reserved.
Genaray | Lighting & Lighting Accessories
